5Star ZX4 Stock Firmware Flash Files ROM:
We are going to Flash Stock ROM on 5Star ZX4. In this guide, we have used Sp Flash Tool to flash the Stock Firmware on 5Star ZX4 And we include the Official link to Download 5Star ZX4 Stock ROM and all Needed Files. your device may get bricked And flashing Stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a Comment.
We will use Sp Flash Tool to unbrick the 5Star ZX4. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your 5Star ZX4.
SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very user-friendly tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.
You Can Use The Following Flash Files For Upgrade or Unbrick 5Star ZX4 / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The 5Star ZX4 Stock Firmware IMEI Null or Unknown Baseband Problems Can Be Solved.
- Gapps File: Included
- Device Supported: 5Star ZX4
- Tool Supported: SP Flash Tool
- Processor: MediaTek –
- Os: Android 8.1.0 Oreo
- Please Read and understand the Full Guide Before Flashing 5Star ZX4 Stock Rom.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected
Don’t flash another preloader and DSP_BL blocks!
It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Take a Backup:
- 1- Backup your Call Log – Contacts – Sms – Etc With G Backup
- 2- Backup your current Firmware With MTK Droid Tool
- 3- Backup your backup IMEI NVRAM
Pre-Requirements To Flash 5Star ZX4 Stock Firmware:
- Supported Phone: 5Star ZX4
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- SP Flash Tool: Download the latest SP Flash Tool and extract it (Install)
- Vcom Drivers.: Get MTK Android USB Drivers. and set up on your pc.
Instructions to Install Firmware on 5Star ZX4:
- Extract And Run SP flash tool.
- Install MTK android USB drivers.
- Then download Firmware file/Flash file/Rom for your phone from below.
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
- Now open SP flash tool.exe.
- When SP flash tool open, go to download button in SP flash tool.
- In download tab, click on scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in SP flash tool.
- Close SP flash tool on your computer and unplug phone.
- Power on the phone and enjoy.
- After flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.