Archos AC55 Platinum Firmware Flash File

Archos AC55 Platinum Firmware

If you have an Archos AC55 Platinum smartphone. And you want Archos AC55 Platinum Firmware to solve your bricked device. then you definitely are in the best article/post.

We will guide you to install the official Archos AC55 Platinum Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the Archos AC55 Platinum Flash File below. Download the Stock ROM file to repair your Archos AC55 Platinum.

This article contains the Archos AC55 Platinum Firmware. That will allow you to recover your Archos AC55 Platinum mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device, and also come back that device to the factory state.

The Benefit Of Archos AC55 Platinum Firmware:

  • Flash Stock To Unbrick your Archos AC55 Platinum
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Archos AC55 Platinum
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Archos AC55 Platinum
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Archos AC55 Platinum Firmware:

Archos AC55 Platinum Flashing Tool:

We will use SPD Factory Upgrade Tool to flash Archos AC55 Platinum firmware as we use for Weiimi M8. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Archos AC55 Platinum.

Archos AC55 Platinum Driver:

How to Install Firmware on Archos AC55 Platinum:

  1. Install Spreadtrum Drivers.
  2. Install the SPD Download Tool.
  3. Open the Research download tool > bin folder.
  4. Launch ResearchDownload.exe.
  5. Click on the Load Packet icon (top left corner).
  6. In the window that pops up, navigate to the location of the .pac file, select it then click Open.
  7. The PAC file should now be loaded (its name should appear at the top).
  8. Click the Settings Icon (top left corner).
  9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  10. Click the Start downloading button.
  11. You should see Waiting…. under the Progress bar.
  12. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
  13. Once flashing is complete, you’ll see Passed.
  14. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction Archos AC55 Platinum Flashing With Spreadtrum Upgrade Tool.

Disclaimer:

  • Bin Packet load Error: If you ever got Bin Packet Error When Flashing Archos AC55 Platinum then simply download and try flashing the Archos AC55 Platinum firmware with this version of SPD Upgrade Tool.
  • How to Write IMEI: After flashing the Archos AC55 Platinum firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Archos AC55 Platinum Firmware Details:

  • Gapps File: Included
  • Device Supported: Archos AC55 Platinum
  • Tool Supported: SPD Factory Upgrade Tool
  • Processor: SPD
  • Os: Android
Get Link

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More