How To Flash Calme CM9 Firmware File

We will guide you to install the official Calme CM9 Firmware on the device. This step is simple and straightforward to follow. We have listed the Calme CM9 Flash File below. Download the Stock ROM file to repair your Calme CM9.

Calme S20 Stock Firmware Flash File


How To Flash Calme CM9 Firmware

Some cases we have bricked our Calme CM9. after that, we can bring back the phone with the Stock Firmware anytime. Also if you think your Calme CM9 lag or has a problem. Then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Calme CM9.

The Benefit Of Calme CM9 Firmware:

  • Flash Stock To Unbrick your Calme CM9
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Calme CM9
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Calme CM9
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Calme CM9 Firmware:

Take a Backup:

Calme CM9 Flashing Tool:

We will use Sp Flash Tool to flash Calme CM9. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Calme CM9.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Calme CM9 Driver:

How to install Calme CM9 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download Calme CM9 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Calme CM9 Firmware Flashing With Sp Flash Tool


  • Please read and understand the Full Guide Before Flashing Calme CM9 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Calme CM9 Firmware Details:

  • Gapps File: Included
  • Device Supported: Calme CM9
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6732
  • Os: Android 4.4.4


Share This


Wordpress (0)
Disqus ( )