Download Official Stock Firmware Flash File For Tecno iClick IN6. If you have Tecno iClick IN6 Smartphone and You want to download the Stock ROM – Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.
Download Tecno iClick IN6 Stock ROM Firmware Flash File
This article contains the Tecno iClick IN6 Stock ROM Firmware Flash Files that will allow you to recover your Tecno iClick IN6 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device, brick your device, modify your device and also come back that device to the factory state.
We will use Sp Flash Tool to unbrick the Tecno iClick IN6. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tecno iClick IN6.
The Benefit Of Tecno iClick IN6 Stock ROM
- Flash Stock To Unbrick your Tecno iClick IN6
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade Tecno iClick IN6
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter on Tecno iClick IN6
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
- Gapps File: Included
- Device Supported: Tecno iClick IN6
- Tool Supported: SP Flash Tool
- Processor: MediaTek –MT6763
- Please Read and understand the Full Guide Before Flashing Tecno iClick IN6 Stock Rom.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Take a Backup:
- 1- Backup your Call Log – Contacts – Sms – Etc With G Backup
- 2- Backup your current Firmware With MTK Droid Tool
- 3- Backup your backup IMEI NVRAM
Pre-Requirements To Flash Tecno iClick IN6 Stock Firmware:
- Supported Phone: Tecno iClick IN6
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- SP Flash Tool: Download the latest SP Flash Tool and extract it (Install)
- Vcom Drivers: Get MTK Android USB Drivers. and set up on your pc.
Instructions to Install Firmware on Tecno iClick IN6:
- Extract And Run SP flash tool.
- Install MTK android USB drivers.
- Then download Firmware file/Flash file/Rom for your phone from below.
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
- Now open SP flash tool.exe.
- When SP flash tool open, go to download button in SP flash tool.
- In download tab, click on scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in SP flash tool.
- Close SP flash tool on your computer and unplug phone.
- Power on the phone and enjoy.
- After flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.