Energy Phone Pro 4G Navy Firmware Flash File [QFIL ROM]

If you have an Energy Phone Pro 4G Navy smartphone. And you want Energy Phone Pro 4G Navy Firmware to solve your bricked device. then you definitely are in the best article/post. We will guide you to install the official Energy Phone Pro 4G Navy Firmware on the device.

This step is simple and straightforward to follow. We have listed the Energy Phone Pro 4G Navy Flash File below. Download the Stock ROM file to repair your Energy Phone Pro 4G Navy.

Energy Phone Pro 4G Navy Firmware

Energy Phone Pro 4G Navy Firmware Flash File [QFIL ROM]:

We are going to Flash Pro 4G Navy Firmware. In this guide, we have used QPST Tool to flash the Stock Firmware on Energy Phone Pro 4G Navy. And we include the Official link to Download Energy Phone Pro 4G Navy Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out. To perform this advanced process of Flashing Stock ROM please Go Step by step. If you got any error then leave a comment.

The Benefit Of Stock Firmware:

  • Flash Stock To Unbrick your Energy Phone Pro 4G Navy
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Energy Phone Pro 4G Navy
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Energy Phone Pro 4G Navy
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Energy Phone Pro 4G Navy Firmware:

Take a Backup:

Flashing Tool And Drivers:

We will use Qualcomm Flash Image Loader (QFIL) to unbrick the Energy Phone Pro 4G Navy. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Energy Phone Pro 4G Navy.

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Energy Phone Pro 4G Navy Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

How to install Energy Phone Pro 4G Navy Firmware:

1. Start The QPST Tool.
2. Make sure your Energy Phone Pro 4G Navy is charged to at least 30%.
3. Run QFIL tool.
4. Now Browse under the Programmer path to Chose Energy Phone Pro 4G Navy Firmware MBN File.
5. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6. Next Go To Load XML, select rawprogram_unsparse_without_qcn.xml and Select Patch0.xml
7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
8. Click on Select Port and choose the port.
9. Click on Download to start flashing.
10. Disconnect device from USB cable once Finish Download appears.
That’s all!

Follow Detailed Instruction Energy Phone Pro 4G Navy Firmware Flashing With Qualcomm QPST.

Energy Phone Pro 4G Navy Firmware Details:

  • Gapps File: Included
  • Device Supported: Energy Phone Pro 4G Navy
  • Tool Supported: QFIL QPST Flash Tool
  • Processor: Qualcomm Snapdragon 616 de 28 nm
  • Os: Android

Download

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More