How To Flash Evercoss A2 Firmware With QFIL

Download Official Stock Firmware Flash File For Evercoss A2. If you have Evercoss A2 Smartphone and You want to download the Stock ROM. Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.

Evercoss A2 Firmware

We are going to Flash Evercoss A2 Firmware. In this guide, we have used QPST Tool to flash the Stock Firmware on Evercoss A2. And we include the Official link to Download Evercoss A2 Stock ROM and all Needed Files. your device may get bricked And flashing Stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a Comment.

The Benefit Of Evercoss A2 Firmware:

  • Flash Stock To Unbrick your Evercoss A2
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Evercoss A2
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Evercoss A2
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Evercoss A2 Firmware Details:

  • Gapps File: Included
  • Device Supported: Evercoss A2
  • Tool Supported: QFIL QPST
  • Processor: Qualcomm
  • Os: Android

Pre-Requirements To Flash Evercoss A2 Firmware:

Take a Backup:

Flashing Tool And Drivers:

We will use Qualcomm Flash Image Loader (QFIL) to unbrick the Evercoss A2. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Evercoss A2.

Related Firmware:


  • Please Read and understand the Full Guide Before Flashing Evercoss A2 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

How to install Evercoss A2 Firmware:

1. Start The QPST Tool.
2. Make sure your Evercoss A2 is charged to at least 30%.
3. Run QFIL tool.
4. Now Browse under the Programmer path to Chose Evercoss A2 Firmware MBN File.
5. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6. Next Go To Load XML, select rawprogram_unsparse_without_qcn.xml and Select Patch0.xml
7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
8. Click on Select Port and choose the port.
9. Click on Download to start flashing.
10. Disconnect device from USB cable once Finish Download appears.
That’s all!

Follow Detailed Instruction Evercoss A2 Firmware Flashing With Qualcomm QPST.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More