IReader FaceNote F1 Stock Firmware Flash File (9008 EDL ROM)

IReader FaceNote F1 Stock Firmware
Download Stock Firmware File For IReader FaceNote F1. If you have IReader FaceNote F1 Smartphone and You want to download the IReader FaceNote F1 Stock ROM for it then you are in a Correct Place.

We are going to Flash “IReader FaceNote F1 Firmware”. In this guide, we have used QPST Tool to flash the Stock Firmware on IReader FaceNote F1.

And we include the Official link to Download IReader FaceNote F1 Stock ROM and all Needed Files.  your device may get bricked And flashing stock ROM is the only way to go out.

To perform this advanced process of Flashing Stock ROM please Go Step by step. If you got any errors then leave a comment.

The Benefit Of IReader FaceNote F1 Stock ROM:

  • Flash Stock To Unbrick your IReader FaceNote F1
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

IReader FaceNote F1 Stock ROM Details:

Gapps File: Included
Device Supported: 
IReader FaceNote F1
Tool Supported: 
Qualcomm Flash Image Loader (QFIL)
Android 9.0 Pie
Firmware Version: Stock Firmware


Firmware IReader FaceNote F1: Download

Pre-Requirements To Flash IReader FaceNote F1 Firmware:

A. Install IReader FaceNote F1 ADB & Fastboot on Your Computer:

Qualcomm Drivers driver is essential if you want to flash your Qualcomm device with the Qualcomm Flash Image Loader. If you don’t have it installed, you simply can’t use the Qualcomm Flash Image Loader in flashing your Qualcomm devices.

 Just download the Android Qualcomm USB Driver and setup.

B. IReader FaceNote F1 Flash Tool:

Qualcomm Flash Image Loader (QFIL) is a small application that allows you to flash stock firmware on Qualcomm smartphones and tablets. Download the latest version of the Qualcomm Flash Image Loader application which supports Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10.

C. Take Full backup Of IReader FaceNote F1:

In order to ensure that you do not lose your data, it is very important to get a regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of IReader FaceNote F1 it is important to take full IReader FaceNote F1 backup and its IMEI just read below helpful article and make sure all the important data is saved.

What To Do Before Android Firmware Installation?

How To Install IReader FaceNote F1 Stock Firmware:

  1. Launch QFIL
  2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No-Port Available should change to Qualcomm HS-USB QDLoader 9008.
  3. Under Select Build Type, tick Flat Build
  4. Under Select Programmer, click Browse.
  5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open.
  6. Click Load XML.
  7. In the Window that pops up, highlight the raw program() file then click Open.
  8. Another window will automatically pop up, highlight the patch() file then click Open.
  9. Click Download.
  10. QFIL should start flashing the (IReader FaceNote F1 firmware), Do Not interrupt.

You should get Download Succeed Finish Download once QFIL has successfully flashed the IReader FaceNote F1 firmware. Disconnect the device and boot up

Follow Detailed Instruction IReader FaceNote F1 Firmware Flashing With Qualcomm QPST.


  • Please read and understand the Full Guide Before Flashing IReader FaceNote F1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.


Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More