Motorola G9 Power Stock Firmware Flash File (QCOM SD662 – Android 10)

Motorola G9 Power Stock Firmware

Welcome to the Motorola G9 Power Firmware flash page. In this post, we will guide you on how to revert from custom ROM, unroot, and install Motorola G9 Power Stock ROM.

The Benefit Of Stock ROM:

You’ll find the below Motorola Motorola G9 Power Stock ROM useful if you have used the flashed customized builds on the device. Brick your device, change your device, and also come back that device to the factory state.

  • Keeps Rebooting
  • Update and downgrade
  • Unbrick
  • To bypass FRP Lock on Motorola G9 Power
  • Boots Straight Into Recovery
  • Boots Straight Into its Bootloader
  • Freeze at the startup screen or boot Animation

Pre-Requirements To Flash Stock ROM:

A. Install Motorola ADB & Fastboot on Your Computer:

First, you’ll have to install Motorola Drivers on your computer, which are the utilities that let you flash images using Fastboot commands or Motorola RSD Lite.

There are several “one-click” and “light” versions of ADB and Fastboot made by third parties, but I wouldn’t recommend using these because they’re not updated as frequently as the official utilities.

So they might not be fully compatible with newer devices. So download the Motorola Device Manager 2.5.4.exe latest version and setup.

B. Motorola G9 Power Flash Tool:

We will use Motorola RSD Lite to flash Motorola G9 Power Firmware. This tool is very efficient. Follow the step-by-step procedure to use One-Click Unbrick Tool and unbrick.

C. Take Full backup Of Motorola:

To ensure that you do not lose your data, it is essential to get a regular backup. Thankfully, there are many methods to perform Android complete backup.

To take a full backup of Motorola G9 Power, it is important to take a full backup, and its IMEI just read the below helpful article and make sure all important data is saved.

What To Do Before Android Firmware Installation?

How To Flash Motorola G9 Power Firmware With RSD Lite Tool:

Method 1:

1. First of all, Download the RSD Lite Tool Setup and install it on your computer.

2. Once the installation is completed, launch the RSD Tool on your Computer.

3. Now, Click on the Browse button and locate the Firmware.

Browse button and locate the Motorola Moto E3 XT1700 Firmware

4. Once you have successfully added the firmware, the complete file properties will be shown on the right panel.

Successfully added the Motorola Moto E3 XT1700 firmware

5. Now, Connect your phone to the Computer (make sure it is in fastboot mode. To boot into fastboot mode: Press Volume Down + Power button).

6. Once your device is connected to the computer, it will be shown in the device list area.

Motorola Moto E3 XT1700 connected

7. Click on the Start button to begin the Flashing or installing process.

8. Flashing or Installing Motorola Firmware may take up to 5-10 minutes to complete (depends on the size of the firmware).

9. When the Flashing process is completed, you will be able to see the Finished Message

10. Disconnect your Motorola from the computer and restart it.

Method 2:

1. Download the file.

2. Extract ‘Motorola G9 Power Firmware’ and mfastboot to the same folder you can easily locate. The firmware file comes in an

3. Power off your phone.

4. Reboot your phone to bootloader or use this command to boot to bootloader

adb reboot-bootloader

5. In the mfastboot folder, open the ADB command file or command prompt.

6. Enter these commands one after the other to flash the firmware.

The command-line system.img_sparsechunks may differ. Confirm by checking the firmware folder. And at the last command, your phone will reboot.

The first booting may take time to boot. If the firmware is in, tar.gz extension, you can flash it by using this command in your cmd flashall.bat /EU


  • Read the Full Guide Before Flashing “Motorola G9 Power Stock ROM”.
  • Use these instructions at your own risk.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.

Motorola G9 Power Stock Firmware Details:

Model Motorola G9 Power
Region Global
Language Multi-language
Android Version Android 10
Operator Clean
Size 2 GB
Firmware Version: QZCS30.Q4-22-57-3
Download QZCS30.Q4-22-57-3

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More