Tecno KF6M Stock Firmware Flash File (MT6765 – 11.0)

How To Flash Tecno Camon ID3V Firmware File [Stock ROM]

Are you looking for an easy and fast way to flash Tecno KF6M firmware with a PC or without a PC? So You guys are at the right article.

Because I will share a tutorial on how to flash your Tecno KF6M stock ROM which is 100% successful with a PC to solve various problems with your phone.

What is soft brick And how To fix it?

A Soft Brick on Tecno KF6M is usually just when your Tecno KF6M is stuck in a boot loop, and as the name implies, is caused by a software error on Tecno KF6M, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “(stock ROM on Tecno KF6M)” through recovery or with SP Flash Tool.

By flashing Stock firmware to your cellphone, you can solve various problems or damage that occurs on your Tecno KF6M cellphone quickly and simply. This flash method can be used to solve the Tecno KF6M HP that experiences:

Various Tecno KF6M Problems:

  • Bootloop,
  • System error,
  • Restart itself,
  • Hang on logo,
  • The application has stopped working,
  • Update failed,
  • Forgot Password,
  • Forgot pattern,
  • Less sensitive,
  • Lost gsm signal,
  • Virus or Malware

Tecno KF6M Stock ROM Details:

Gapps File: Included
Device Supported: Tecno KF6M
Tool Supported: SP Flash Tool
Firmware Ver: KF6m-H6218B-RGo-OP-210610V171
Os: Android 11
Processor: MediaTek – MT6765
Drivers: Media Tek Vcom Android USB

Preparation To Flash Tecno KF6M Firmware:

Before you continue flashing the Tecno KF6M HP with a PC, here are the ingredients that you need to prepare first:

  • Computer or Laptop.
  • USB cable to connect the cellphone with the computer.
  • Tecno KF6M with a battery of more than 60% so that the flashing process doesn’t suddenly turn off itself.
  • Then you download the software: SP Flashtool and extract it on your computer.
  • Then also download: MTK USB Driver, then extract it on your computer.
  • And most importantly, Download: Firmware Tecno KF6M and extracts the file.

How To Flash Tecno KF6M With PC

If all the ingredients have been prepared, then we can do the steps to Flash the Tecno KF6M with a PC.

Steps to Flash Tecno KF6M with PC:

  • First, you install the downloaded MTK USB Driver.
  • Then you open SP flashtool.exe by right-clicking ” Run as administrator “.
  • Next, click the choose button in Scatter-loading File and enter the MTxxx_Android_scatter_emmc.txt file in the Firmware folder that you downloaded & extracted, then click Open.

choose button in Scatter-loading File

  • Then click the green Download button which looks like an arrow in shape.
  • Turn off your cellphone.
  • Next, press and hold the Volume Up button while connecting your Tecno KF6M to the computer with a USB cable.
  • If an error occurs, just change the Download Only mode to Format all + Download.
  • Later, the flashing process will automatically start running.
  • Just wait for this process to finish.
  • If the flashing process is complete, a Download Ok sign will appear.

The Tecno KF6M flashing process is complete.

Don’t forget to restart your Tecno KF6M cellphone after flashing. It may take a long time to reboot. If you experience problems such as errors or the cellphone is not detected, check the USB cable again. Check the port whether everything is in normal condition or not. And try another version of SP Flashtool and its firmware, who knows the other version is more functional and runs successfully.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More