UMIDIGI Power 5 Stock Firmware Flash File (MT6762 – 10.0)


Are you looking for an easy and fast way to flash UMIDIGI Power 5 firmware with a PC or without a PC? So You guys are at the right article.

Because I will share a tutorial on how to flash your UMIDIGI Power 5 stock ROM which is 100% successful with a PC to solve various problems with your phone.

What is soft brick And how To fix it?

A Soft Brick on UMIDIGI Power 5 is usually just when your UMIDIGI Power 5 is stuck in a boot loop, and as the name implies, is caused by a software error on UMIDIGI Power 5, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “(stock ROM on UMIDIGI Power 5)” through recovery or with SP Flash Tool.

By flashing Stock firmware to your cellphone, you can solve various problems or damage that occurs on your UMIDIGI Power 5 cellphone quickly and simply. This flash method can be used to solve the UMIDIGI Power 5 HP that experiences:

Various UMIDIGI Power 5 Problems:

  • Bootloop,
  • System error,
  • Restart itself,
  • Hang on logo,
  • The application has stopped working,
  • Update failed,
  • Forgot Password,
  • Forgot pattern,
  • Less sensitive,
  • Lost gsm signal,
  • Virus or Malware

UMIDIGI Power 5 Stock ROM Details:

Gapps File: Included
Device Supported: UMIDIGI Power 5
Tool Supported: SP Flash Tool
Firmware Ver: V1-0_20210705
Os: Android 10
Processor: MediaTek – MT6762
Drivers: Media Tek Vcom Android USB

Preparation To Flash UMIDIGI Power 5 Firmware:

Before you continue flashing the UMIDIGI Power 5 HP with a PC, here are the ingredients that you need to prepare first:

  • Computer or Laptop.
  • USB cable to connect the cellphone with the computer.
  • UMIDIGI Power 5 with a battery of more than 60% so that the flashing process doesn’t suddenly turn off itself.
  • Then you download the software: SP Flashtool and extract it on your computer.
  • Then also download: MTK USB Driver, then extract it on your computer.
  • And most importantly, Download: Firmware UMIDIGI Power 5 and extracts the file.

3/64 EU UMIDIGI_POWER5-E_V1-0_20210705

4/64 EU UMIDIGI_POWER5-E_V1-0_20210705

3/64 Global UMIDIGI_POWER5_V1-0_20210702

4/64/ Global UMIDIGI_POWER5_V1-0_20210702

How To Flash UMIDIGI Power 5 With PC

If all the ingredients have been prepared, then we can do the steps to Flash the UMIDIGI Power 5 with a PC.

Steps to Flash UMIDIGI Power 5 with PC:

  • First, you install the downloaded MTK USB Driver.
  • Then you open SP flashtool.exe by right-clicking ” Run as administrator “.
  • Next, click the choose button in Scatter-loading File and enter the MTxxx_Android_scatter_emmc.txt file in the Firmware folder that you downloaded & extracted, then click Open.

choose button in Scatter-loading File

  • Then click the green Download button which looks like an arrow in shape.
  • Turn off your cellphone.
  • Next, press and hold the Volume Up button while connecting your UMIDIGI Power 5 to the computer with a USB cable.
  • If an error occurs, just change the Download Only mode to Format all + Download.
  • Later, the flashing process will automatically start running.
  • Just wait for this process to finish.
  • If the flashing process is complete, a Download Ok sign will appear.

The UMIDIGI Power 5 flashing process is complete.

Don’t forget to restart your UMIDIGI Power 5 cellphone after flashing. It may take a long time to reboot. If you experience problems such as errors or the cellphone is not detected, check the USB cable again. Check the port whether everything is in normal condition or not. And try another version of SP Flashtool and its firmware, who knows the other version is more functional and runs successfully.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More