Wiko Y80 Stock Firmware Flash File (SC9863A – 9.0)


Wiko Y80 Stock Firmware

Are you looking for an easy and fast way to flash Wiko Y80 firmware with a PC or without a PC? So You guys are at the right article.

Because I will share a tutorial on how to flash your Wiko Y80 stock ROM which is 100% successful with a PC to solve various problems with your phone.

What is soft brick And how To fix it?

A Soft Brick on Wiko Y80 is usually just when your Wiko Y80 is stuck in a boot loop, and as the name implies, is caused by a software error on Wiko Y80, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “(stock ROM on Wiko Y80)” through recovery or with SP Flash Tool.

By flashing Stock firmware to your cellphone, you can solve various problems or damage that occurs on your Wiko Y80 cellphone quickly and simply. This flash method can be used to solve the Wiko Y80 HP that experiences:

Various Wiko Y80 Problems:

  • Bootloop,
  • System error,
  • Restart itself,
  • Hang on logo,
  • The application has stopped working,
  • Update failed,
  • Forgot Password,
  • Forgot pattern,
  • Less sensitive,
  • Lost gsm signal,
  • Virus or Malware

Wiko Y80 Stock ROM Details:

Gapps File: Included
Device Supported: Wiko Y80
Tool Supported: SPD Download Tool
Firmware Ver: Wiko_Y80_EEA_V38
Os: Android 9 Pie
Processor: SC9863A
Drivers: Spreadtrum Drivers driver’s latest version

Preparation To Flash Wiko Y80 Firmware:

Before you continue flashing the Wiko Y80 HP with a PC, here are the ingredients that you need to prepare first:

  • Computer or Laptop.
  • USB cable to connect the cellphone with the computer.
  • Wiko Y80 with a battery of more than 60% so that the flashing process doesn’t suddenly turn off itself.
  • Then you download the software: SPD Flashtool and extract it on your computer.
  • Then also download: Spreadtrum Driver, then extract it on your computer.
  • And most importantly, Download: Firmware Wiko Y80 and extracts the file.

How To Flash Wiko Y80 With PC

If all the ingredients have been prepared, then we can do the steps to Flash the Wiko Y80 with a PC.

Steps to Flash Wiko Y80 with PC:

  • Install Spreadtrum Drivers.
  • Install the SPD Download Tool.
  • Open the Research download tool > bin folder.
  • Launch ResearchDownload.exe.
  • Click on the Load Packet icon (top left corner).
  • In the window that pops up, navigate to the location of Wiko Y80 firmware.PAC file, select it then click Open.
  • The PAC file should now be loaded (its name should appear at the top).
  • Click the Settings Icon (top left corner).
  • In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  • Click the Start downloading button.
  • You should see Waiting…. under the Progress bar.
  • Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

flashing should begin

Once flashing is complete, you’ll see Passed.

Don’t forget to restart your Wiko Y80 cellphone after flashing. It may take a long time to reboot. If you experience problems such as errors or the cellphone is not detected, check the USB cable again. Check the port whether everything is in normal condition or not. And try another version of SPD Flashtool and its firmware, who knows the other version is more functional and runs successfully.

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More