How To Flash Motorola Moto G Dual SIM XT1068 Firmware File

Motorola Moto G XT1031 Firmware

Welcome to Motorola Moto G Dual SIM XT1068 Firmware flash page. In this post, we will guide you on how to revert form custom ROM, unroot, and install Moto G XT1031 Stock ROM.

Motorola Moto G XT1031 Firmware

The Benefit Of Motorola Moto G Dual SIM XT1068 Stock ROM:

You’ll find these below Motorola Moto G Dual SIM XT1068 Stock ROM useful if you have used the flashed customized builds on the device. Brick your device, change your device, and also come back that device to the factory state.

  • Keeps Rebooting
  • Update Motorola Moto G Dual SIM XT1068 and downgrade
  • Unbrick Motorola Moto G Dual SIM XT1068
  • To bypass FRP Lock on Motorola Moto G Dual SIM XT1068
  • Boots Straight Into Recovery
  • Boots Straight Into its Bootloader
  • Freeze at the startup screen or boot Animation

Pre-Requirements To Flash Motorola Moto G Dual SIM XT1068 Stock ROM:

A. Install Motorola Moto G Dual SIM XT1068 ADB & Fastboot on Your Computer:

First, you’ll have to install Motorola Moto G Dual SIM XT1068 Drivers on your computer, which are the utilities that let you flash images using Fastboot commands or Motorola RSD Lite.

There are several “one-click” and “light” versions of ADB and Fastboot made by third-parties, but I wouldn’t recommend using these because they’re not updated as frequently as the official utilities.

So they might not be fully compatible with newer devices. So download the Motorola Device Manager 2.5.4.exe latest version and setup.

B. Motorola Moto G Dual SIM XT1068 Flash Tool:

We will use Motorola RSD Lite to flash Motorola Moto G Dual SIM XT1068. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Motorola Moto G Dual SIM XT1068.

C. Take Full backup Of Motorola Moto G Dual SIM XT1068:

To ensure that you do not lose your data, it is essential to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take a full backup of Motorola Moto G Dual SIM XT1068, it is important to take full Motorola Moto G Dual SIM XT1068 backup, and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

[quads id=9]

How To Flash Motorola Moto G Dual SIM XT1068 Firmware With Motorola RSD Lite:

Method 1:

1. First of all, Download  RSD Lite Tool Setup and install it on your computer.

2. Once the installation is completed, launch the RSD Tool on your Computer.

3. Now, Click on the Browse button and locate the Motorola Moto G Dual SIM XT1068 Firmware.

Browse button and locate the Motorola Moto G Dual SIM XT1068 Firmware

4. Once you have successfully added the firmware, the complete file properties will be shown on the right panel.

Successfully added the Motorola Moto G Dual SIM XT1068 firmware

5. Now, Connect your Motorola Moto G Dual SIM XT1068 to the Computer (make sure it is in fastboot mode. To boot into fastboot mode: Press Volume Down + Power button).

6. Once your device is Motorola Moto G Dual SIM XT1068 connected to the computer, it will be shown in the device list area.

Motorola Moto G Dual SIM XT1068 connected

7. Click on the Start button to begin the Flashing or installing process.

8. Flashing or Installing Motorola Moto G Dual SIM XT1068 Firmware may take up to 5-10 minutes to complete (depends on the size of the firmware).

9. When Flashing process is completed, you will be able to see the Finished Message

10. Disconnect your Motorola Moto G Dual SIM XT1068 from the computer and restart it.

Method 2:

1. Download mfastboot.zip file.

2. Extract ‘Motorola Moto G Dual SIM XT1068 Firmware’ and mfastboot to the same folder you can easily locate. The firmware file comes in an xml.zip

3. Power off your phone Motorola Moto G Dual SIM XT1068.

4. Reboot your phone to bootloader or use this command to boot to bootloader

adb reboot-bootloader

5. In the mfastboot folder, open ADB command file or command prompt.

6. Enter these commands one after the other to flash the firmware.

[box type=”note” align=”” class=”” width=””]

The command-line system.img_sparsechunks may differ. Confirm by checking the firmware folder. And at the last command, your phone will reboot.

The first booting may take time to boot. If the firmware is in, tar.gz extension, you can flash it by using this command in your cmd flashall.bat /EU

[/box]

Motorola Moto G Dual SIM XT1068 Stock Firmware Details:

  • Model Name: Motorola Moto G Dual SIM XT1068
  • Android Version: 6.0 – 5.0.2 – 4.4.4
  • ROM Size: 551 MB
  • Gapps: Included
  • Tool Supported: RSD Lite Motorola Flash Tool

[box type=”download” align=”aligncenter” class=”” width=””]

Download

Motorola_Moto_G_Dual_SIM_XT1068_01092016.zip

Motorola_Moto_G_XT1068_RETAILDSDSALL_KXB21.85-23_CID7_4.4.4.zip

Motorola_Moto_G2_XT1068_TITAN_RETDE_5.0.2_LXB22.99-16.3_cid7_5.0.2.zip

Motorola_Moto_G_XT1068_RETAILDSDSALL_EU_LXB22.99-16_CID7_5.0.2.zip

Motorola_Moto_G2_XT1068_TITAN_RETLA_DS_6.0_MPB24.65-34-3_cid12_6.0.zip

 Motorola_Moto_G_XT1068_TITAN_RETDE_MPB24.65-34-3_CID7_6.0.zip

[/box]

[quads id=8]
[box type=”warning” align=”” class=”” width=””]

Disclaimer:

  • Read the Full Guide Before Flashing “Motorola Moto G Dual SIM XT1068 Stock ROM”.
  • Use these instructions at your own risk.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.

[/box]

Leave a Reply

Your email address will not be published. Required fields are marked *