This article contains the Samsung Galaxy M10 SM-M105Y Full Repair Firmware. That will allow you to recover your Samsung Galaxy M10 SM-M105Y mobile into its initial Factory state.
Additionally, you can use the Samsung Galaxy M10 SM-M105Y 4 files Full Repair firmware to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.
How To Flash Samsung Galaxy M10 SM-M105Y Full Repair Firmware File
We are going to Flash Stock ROM on Samsung Galaxy M10 SM-M105Y. In this guide, we have used Odin Flash Tool to flash the “Stock Firmware on Samsung Galaxy M10 SM-M105Y”. And we include the Official link to Download Samsung Galaxy M10 SM-M105Y Full Repair Firmware and all Needed Files.
Your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a comment.
The Benefit Of Samsung Galaxy M10 SM-M105Y Full Repair Firmware:
- Flash Stock To Unbrick your Samsung Galaxy M10 SM-M105Y
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter
- By flashing Stock ROM, you can fix software issues.
- Revert to stock to get your warranty.
Samsung Galaxy M10 SM-M105Y Samsung Galaxy M10 SM-M105Y Full Repair Stock ROM Details:
- Gapps File: Included
- Device Supported: Samsung Galaxy M10 SM-M105Y
- Tool Supported: Odin Flash Tool
- Os: Android 8.1 Oreo
Pre-Requirements To Flash Samsung Galaxy M10 SM-M105Y Full Repair Firmware:
A. Install Samsung Galaxy M10 SM-M105Y ADB & Fastboot on Your Computer:
Samsung USB Drivers allows you to connect your Samsung Smartphone and Tablets to the Windows computer without the need of installing the Samsung Kies application.
It also allows you to Flash Samsung Stock Firmware on your Samsung Device using the original drivers.
Just download the Samsung Android USB Driver for Windows and setup.
B. Samsung Galaxy M10 SM-M105Y Flash Tool Odin:
Odin3 is designed to flash Samsung smartphones with stock firmware packages. Custom ROMs rarely do flash with Odin, as this program does not recognize .zip extensions, but only .tar files.
C. Take Full backup Of Samsung Galaxy M10 SM-M105Y:
In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.
To take full back of Samsung Galaxy M10 SM-M105Y it is important to take full Samsung Galaxy M10 SM-M105Y backup and its IMEI just read below helpful article and make sure you all important data is saved.
How To Install Samsung Galaxy M10 SM-M105Y Full Repair Firmware:
1: The first step is to turn off your Samsung Galaxy M10 SM-M105Y and connect it to your PC using a data cable.
2: Now put your phone into download mode by pressing and holding Bixby, Power, and Volume down buttons. When you see a warning on the screen of your phone release the buttons.
3: Press the Volume Up button to proceed to Download Mode.
4: Now open ODIN on your PC and connect your phone to your PC using the original data cable.
You will see your phone has a connection with your PC. The ID: COM on ODIN will change to blue. (If the color didn’t change, then the PC has failed to recognize your phone. Make sure you have installed the right drivers and the drivers were installed successfully. Sometimes the fault lies in the USB cable)
5: After your phone is connected. Click on PDA or on some ODIN versions it is AP.
6: Now select the .tar or .tar.md5 file from the files in extracted Samsung Galaxy M10 SM-M105Y Full Repair firmware.
7: Make sure only Auto Reboot and F.Reset Time are checked in the options tab of Odin.
8: Now if everything is ready. Press on Start.
It will take around 10 minutes to install stock firmware on Samsung Galaxy M10 SM-M105Y. If the flashing is unsuccessful due to some reason. Then try with some other version of Odin.
Finally, if the flashing is successful. Your phone will reboot and it will have the official stock firmware of Samsung.
- BL belongs to Bootloader
- AP belongs to PDA
- select CP in Phone(Modem)
- CSC file in CSC tab.
For example, click on BL and select the file that starts with BL in the folder where you extracted the firmware. Finally, click on AP and select the file that starts with AP and do the same with the CP.