Gomobile GO1452 Movistar Firmware File [Stock ROM]

If you have a Gomobile GO1452 Movistar smartphone. And you want Gomobile GO1452 Movistar Firmware to solve your bricked device. then you definitely are in the best article/post.

We will guide for you to install the official Gomobile GO1452 Movistar Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the Gomobile GO1452 Movistar Flash File below. Download the Stock ROM file to repair your Gomobile GO1452 Movistar.

Gomobile Optimus Firmware

This article contains the Gomobile GO1452 Movistar Firmware. That will allow you to recover your Gomobile GO1452 Movistar mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version.

You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

The Benefit Of Gomobile GO1452 Movistar Firmware:

  • Flash Stock To Unbrick your Gomobile GO1452 Movistar
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Gomobile GO1452 Movistar
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Gomobile GO1452 Movistar
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Gomobile GO1452 Movistar Firmware Details:

  • Gapps File: Included
  • Device Supported: Gomobile GO1452 Movistar
  • Tool Supported: SPD Factory Upgrade Tool
  • Processor: SPD SC9832e
  • Os: Android 8.1.0 Oreo



Pre-Requirements To Flash Gomobile GO1452 Movistar Firmware:

Gomobile GO1452 Movistar Flashing Tool:

We will use the SPD Factory Upgrade Tool to flash Gomobile GO1452 Movistar firmware. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Gomobile GO1452 Movistar.

Gomobile GO1452 Movistar Driver:

How to install Firmware on Gomobile GO1452 Movistar:

  1. Install Spreadtrum Drivers.
  2. Install the SPD Download Tool.
  3. Open the Research download tool > bin folder.
  4. Launch ResearchDownload.exe.
  5. Click on the Load Packet icon (top left corner).
  6. In the window that pops up, navigate to the location of the Gomobile GO1452 Movistar Firmware.pac file, select it then click Open.
  7. The PAC file should now be loaded (its name should appear at the top).
  8. Click the Settings Icon (top left corner).
  9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  10. Click the Start downloading button.
  11. You should see Waiting…. under the Progress bar.
  12. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
  13. Once flashing is complete, you’ll see Passed.
  14. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction Gomobile GO1452 Movistar Firmware Flashing With Spreadtrum Upgrade Tool.


  • Bin Packet load Error: If you ever got Bin Packet Error When Flashing Gomobile GO1452 Movistar Firmware then simply download and try flashing the Gomobile GO1452 Movistar firmware with this version of SPD Upgrade Tool.
  • How to Write IMEI: After flashing the Gomobile GO1452 Movistar Firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Check Also

SANTIN Life Shine Stock Firmware

SANTIN Life Shine Stock Firmware Flash File (MT6739 – Android 7.1)

Are you looking for an easy and fast way to flash SANTIN Life Shine firmware …

Leave a Reply

Your email address will not be published. Required fields are marked *