Hisense Infinity U601 Firmware File [Stock ROM]

If you have a Hisense Infinity U601 smartphone. And you want Hisense Infinity U601 Firmware to solve your bricked device. then you definitely are in the best article/post. We will guide for you to install the official Hisense Infinity U601 Stock Firmware on the device.

This step is simple and straightforward to follow. We have listed the Hisense Infinity U601 Flash File below. Download the Stock ROM file to repair your Hisense Infinity U601.

Hisense Infinity U601 Firmware

 

This article contains the Hisense Infinity U601 Firmware. That will allow you to recover your Hisense Infinity U601 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

The Benefit Of Hisense Infinity U601 Firmware:

  • Flash Stock To Unbrick your Hisense Infinity U601
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Hisense Infinity U601
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Hisense Infinity U601
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Hisense Infinity U601 Firmware Details:

  • Gapps File: Included
  • Device Supported: Hisense Infinity U601
  • Tool Supported: SPD Factory Upgrade Tool
  • Processor: SPD SC9830
  • Os: Android 5.1 Lollipop

Voto_GT13_SC9830_V2.3_170109_5.1.zip

 

Pre-Requirements To Flash Hisense Infinity U601 Firmware:

Hisense Infinity U601 Flashing Tool:

We will use the SPD Factory Upgrade Tool to flash Hisense u601 unbrick file. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Hisense Infinity U601.

Hisense Infinity U601 Driver:

How to install Firmware on Hisense Infinity U601:

  1. Install Spreadtrum Drivers.
  2. Install the SPD Download Tool.
  3. Open the Research download tool > bin folder.
  4. Launch ResearchDownload.exe.
  5. Click on the Load Packet icon (top left corner).
  6. In the window that pops up, navigate to the location of the Hisense Infinity U601 Firmware.pac file, select it then click Open.
  7. The PAC file should now be loaded (its name should appear at the top).
  8. Click the Settings Icon (top left corner).
  9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  10. Click the Start downloading button.
  11. You should see Waiting…. under the Progress bar.
  12. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
  13. Once flashing is complete, you’ll see Passed.
  14. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction Hisense Infinity U601 Firmware Flashing With Spreadtrum Upgrade Tool.

Disclaimer:

  • Bin Packet load Error: If you ever got Bin Packet Error When Flashing Hisense Infinity U601 Firmware then simply download and try flashing the Hisense Infinity U601 firmware with this version of SPD Upgrade Tool.
  • How to Write IMEI: After flashing the Hisense Infinity U601 Firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
CATEGORIES
TAGS
Share This

COMMENTS

Wordpress (0)
Disqus ( )