How to use Xiaomi MI Flash Tool

By | September 8, 2018

These are the instructions on How to use Xiaomi Mi Flash Tool to flash stock firmware on any Xiaomi Smartphone and Tablets.

Requirements: Xiaomi Mi Flash Tool will only work on the Xiaomi Devices which is running on Qualcomm Chipset. It will not support the Xiaomi Devices which are not running on Qualcomm Chipset.

Use Xiaomi MI Flash Tool

Step 1Download and extract the Xiaomi Mi Flash Tool on your computer. After extracting the Xiaomi Mi Flash Tool, you will be able to see the following files.

Step 2: Now, Open the Setup File to install Xiaomi Mi Flash Tool on your computer.

Step 3: Download and extract the Xiaomi Stock Firmware (fastboot files) on your computer. After extracting the Xiaomi Firmware, you will be able to see the similar files.

Step 4: Now, you need to install the Xiaomi USB Driver on your Computer.

Step 5Turn Off your Xiaomi Device.

Step 6: Now, You need to boot your Xiaomi Device into the Download Mode (fastboot mode). To boot into the download mode: Press and Hold Power + Volume Down button for 6-8 seconds.

Step 7: Once you have booted into the Download Mode, you will be able to see the following screen on your device.

Step 8: Now, Connect your Xiaomi Device to the Computer using the USB cable.

Step 8: Now, Open Xiaomi Mi Flash Tool from Start Menu.

Step 9: Once Xiaomi Mi Flash Tool is launched you will be able to see the following screen.

Step 10: Now, Click on the Select Button and locate the Firmware Folder.

Step 11: Now, Click on Flash Button to begin the Flashing Process.

Step 12: Once flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.

 

Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.