Home Huawei Huawei Y360-U82 Firmware Flash File

Huawei Y360-U82 Firmware Flash File [MT6572 ROM]

257
0

Download Official Huawei Y360-U82 Firmware Flash File. If you have Huawei Y360-U82 Smartphone and You want to download the Stock ROM. Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.

Huawei Y360-U82 Firmware Flash File
We are going to Flash Huawei Y360-U82 Firmware. In this guide, we have used Sp Flash Tool to flash the Stock Firmware on Huawei Y360-U82. And we include the Official link to Download Huawei Y360-U82 Stock ROM and all Needed Files.  your device may get bricked And flashing Stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a Comment.

Huawei Y360-U82 Firmware Flash File [MT6572 ROM]:

This article contains the Huawei Y360-U82. That will allow you to recover your Huawei Y360-U82 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

The Benefit Of Huawei Y360-U82 Firmware:

  • Flash Stock To Unbrick your Huawei Y360-U82
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Huawei Y360-U82
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Huawei Y360-U82
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Huawei Y360-U82 Firmware Details:

  • Gapps File: Included
  • Device Supported: Huawei Y360-U82
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6572
  • Os: Android 4.4.2 KitKat
Download
Huawei_Y360-U82_MT6572_24022016_4.4.2.zip

Pre-Requirements To Flash Huawei Y360-U82 Firmware:

Take a Backup:

Flashing Tool:

We will use Sp Flash Tool to flash Huawei Y360-U82 as we use for Huawei GR5 KII-L33. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Huawei Y360-U82.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Driver:

How to install Huawei Y360-U82 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Huawei Y360-U82 Stock ROM.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Huawei Y360-U82 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Huawei Y360-U82 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.