iPhone 8 Plus Clone Firmware Flash File [MT6571 4.4.2]

Iphone 8 Plus Clone Firmware Flash File [MT6571 4.4.2]

This article contains the iPhone 8 Plus Clone Firmware Flash Files. That will allow you to recover your iPhone 8 Plus Clone mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

iPhone 8 Plus Clone Firmware Flash File [Stock ROM]:

We are going to Flash Stock ROM on iPhone 8 Plus Clone. In this guide, we have used Sp Flash Tool to flash the Stock Firmware on iPhone 8 Plus Clone. And we include the Official link to Download iPhone 8 Plus Clone Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a comment.

The Benefit Of iPhone 8 Plus Clone Firmware:

  • Flash Stock To Unbrick your iPhone 8 Plus Clone
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade iPhone 8 Plus Clone
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on iPhone 8 Plus Clone
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash iPhone 8 Plus Clone Firmware:

Take a Backup:

iPhone 8 Plus Clone Flashing Tool:

We will use Sp Flash Tool to flash the iPhone 8 Plus Clone as we use for EVETEK TRENDY PLUS 4G R11. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your iPhone 8 Plus Clone.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

iPhone 8 Plus Clone Driver:

How to install iPhone 8 Plus Clone Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download iPhone 8 Plus Clone Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction iPhone 8 Plus Clone Firmware Flashing With Sp Flash Tool


  • Please read and understand the Full Guide Before Flashing iPhone 8 Plus Clone Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

umer ROM Details


  • Gapps File: Included
  • Device: umer
  • Flash Tool: SP Flash Tool
  • MediaTek : MT6571
  • Os: Android 4.4.2


  • No Root
  • No Twrp
  • No Tweaks
  • No Overclocking
  • No Customizations

iPhone_8_Plus_4_4_2_ALPS_KK1_MP7_V1.7z PASSWORD

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More