Download Official Stock itel A11 Firmware Flash File For itel A11. If you have itel A11 Smartphone and You want to download the Stock ROM. Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.
If you’re looking for the itel A11 Firmware. you need to flash, it can sometimes be difficult to locate online For itel A11. In this Article/Tutorial about Unbrick itel A11. And download Flash Files tested and working file. I have explained the method which is used by People or the Repairing Shops
itel A11 Firmware Flash File [Stock ROM]:
We will use the SPD Flash Tool to unbrick the itel A11. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your itel A11.
The Benefit Of itel A11 Firmware:
A Soft Brick is usually just when you’re itel is stuck in a boot loop, and as the name implies, is caused by a software error on itel A11, usually the lack of a system to boot from or some other minor software bug that glitching boot.
They are easily fixable by flashing the stock ROM on itel A11 through recovery or with SPD Flash Tool. If your itel A11 device turns to a soft-brick, it may:
- itel A11 Keeps Rebooting;
- itel A11 Boots Straight Into Recovery;
- itel A11 Boots Straight Into its Bootloader;
- itel A11 Freeze at the startup screen or boot Animation;
- Please read and understand the Full Guide Before Flashing itel A11 Stock Rom.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Bin Packet load Error on itel A11: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
Take a Backup:
Pre-Requirements To Flash itel A11 Firmware:
- Supported Phone: itel A11
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- itel A11 Download Tool: Download the latest SPD Download Tool and extract it (Install)
- itel A11 Spreadtrum Drivers: Get Spreadtrum Drivers. and set up on your pc.
Instructions to Install itel A11 Firmware:
Step 1. Install Spreadtrum Drivers.
Step 2. Install the SPD Download Tool.
Step 3. Open the Research download tool > bin folder.
Step 4. Launch ResearchDownload.exe.
Step 5. Click on the Load Packet icon (top left corner).
Step 6. In the window that pops up, navigate to the location of the itel A11 firmware.PAC file, select it then click Open.
Step 7. The PAC file should now be loaded (its name should appear at the top).
Step 8. Click the Settings Icon (top left corner).
Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
Step 8. Click the Start downloading button.
Step 9. You should see Waiting…. under the Progress bar.
Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
Step 11. Once flashing is complete, you’ll see Passed.
Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.
Follow Detailed Instruction itel A11 Firmware Flashing With Spreadtrum Upgrade Tool.
itel A11 Firmware Details:
- Gapps File: Included
- Device: itel A11
- Tool: SPD Upgrade Tool
- Processor: SPD-SC7731
- Os: Android 6.0 Marshmallow
- No Root
- No Twrp
- No Tweaks
- No Overclocking
- No Customizations