Jivi Energy E12 Firmware Flash File [Stock ROM]


If you’re looking for the Jivi Energy E12 Firmware. you need to flash, it can sometimes be difficult to locate online. For Jivi Energy E12. In this Article/Tutorial about Unbrick Jivi Energy E12. And download Flash Files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To install Stock ROM on Jivi Energy E12 Mediatek Based Devices.

Jivi Energy E12 Firmware Flash File [Stock ROM]

This article contains the Energy E12 Hyphone Firmware Flash Files. That will allow you to recover your Jivi Energy E12 Hyphone mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

Jivi Energy E12 Firmware Flash File [Stock ROM]:

We will use the SPD Flash Tool to unbrick the Jivi Energy E12 Hyphone as we use for Himax Pure II. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Jivi Energy E12 Hyphone.

The Benefit Of Jivi Energy E12 Hyphone Firmware:

A Soft Brick is usually just when you’re Jivi Energy E12 Hyphone is stuck in a boot loop, and as the name implies, is caused by a software error on Jivi Energy E12 Hyphone, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Jivi Energy E12 Hyphone through recovery or with SPD Flash Tool. If your Jivi Energy E12 Hyphone device turns to a soft-brick, it may:

  • Jivi Energy E12 Hyphone Keeps Rebooting;
  • Jivi Energy E12 Hyphone Boots Straight Into Recovery;
  • Jivi Energy E12 Hyphone Boots Straight Into its Bootloader;
  • Jivi Energy E12 Hyphone Freeze at the startup screen or boot Animation;

Jivi Energy E12 Hyphone Firmware Details:

  • Gapps File: Included
  • Device Supported: Jivi Energy E12 Hyphone
  • Tool Supported: SPD Upgrade Tool
  • Processor: SPD
  • Os: Android


  • Please Read and understand the Full Guide Before Flashing Jivi Energy E12 Hyphone Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error on Jivi Energy E12 Hyphone: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI on Jivi Energy E12 Hyphone: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Take a Backup:

Pre-Requirements To Flash Jivi Energy E12 Hyphone Firmware:

  • Supported Phone: Jivi Energy E12 Hyphone
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Jivi Energy E12 Hyphone Download Tool: Download the latest SPD Download Tool and extract it (Install)
  • Jivi Energy E12 Hyphone Spreadtrum Drivers: Get Spreadtrum Drivers. and set up on your pc.

Instructions to Install Jivi Energy E12 Hyphone Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Jivi Energy E12 Hyphone firmware.PAC file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction Jivi Energy E12 Hyphone Firmware Flashing With Spreadtrum Upgrade Tool.

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More