Motorola Moto C Firmware Flash File [XT1754 NAMATH]

Download Official Stock Firmware Flash File For Motorola Moto C. If you have Motorola Moto C Smartphone and You want to download the Stock ROM – Flash File -For it then You are in a right place, You have to do this by using the Below Tutorial.

Motorola Moto C Firmware Flash File [XT1754 NAMATH]

Motorola Moto C Firmware Flash File [XT1754 NAMATH]

The Benefit Of Motorola Moto C Firmware:

A Soft Brick is usually just when you’re Motorola Moto C is stuck in a boot loop, and as the name implies, is caused by a software error on Motorola Moto C, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Motorola Moto C through recovery or with SPD Flash Tool. If your Motorola Moto C device turns to a soft-brick, it may:

  • Motorola Moto C Keeps Rebooting;
  • Motorola Moto C Boots Straight Into Recovery;
  • Motorola Moto C Boots Straight Into its Bootloader;
  • Motorola Moto C Freeze at the startup screen or boot Animation;

Motorola Moto C Firmware Details:

  • Gapps File: Included
  • Device Supported: Motorola Moto C
  • Tool Supported: RSD Lite Motorola Flash Tool
  • Processor:
  • Os: Android 7.0 Nougat
Download
Google Drive
Android File Host

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Motorola Moto C Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Take a Backup:

Pre-Requirements To Flash Motorola Moto C Firmware:

  • Supported Phone: Motorola Moto C
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Motorola Moto C Download Tool: Download the RSD Lite Motorola Flash Tool and extract it (Install)
  • Motorola Moto C USB Driver and set up on your pc.

Instructions to Install Motorola Moto C Firmware:

  1. Extract the Motorola Moto C firmware in the zip file to your computer, open the extracted folder.
  2. Extract the firmware in the zip file to your computer, open the extracted folder.
  3. After extracting you will see an XML file “VZW” then open the file with notepad. Remove all lines with the word “getvar”, there were two lines that have the word “getvar”, then save.
  4. Open RSD Lite, press the “…” next to the filename. Find and select the XML file that has been edited in step No.2.Your phone must be on the AP FastBoot Mode.

    ⇒Turn off your phone.⇒Press and hold the Vol Up + Vol Down + Power button together.⇒You will enter into the Boot Mode Selection Menu, scroll down and select AP Fastboot.

  5. Connect your phone to your computer via USB, will be recognized as
    Once the device is recognized, Press the start button.
  6. Flashing process will take about 15-20 minutes.
  7. If the flash is successful, your phone will reboot and revert to the stock firmware.
CATEGORIES
TAGS
Share This

COMMENTS

Wordpress (0)
Disqus ( )