Home Packard Bell Packard Bell M10400 Firmware Flash File

Packard Bell M10400 Firmware Flash File [MT8167 ROM]


today we have a good new News for Packard Bell M10400 users, Now you can download and install the Official Packard Bell M10400 firmware. If you are searching stock Firmware for Packard Bell M10400 So you are in right place. Here we will completely guide you how to Install Official Stock Firmware Flash File on Packard Bell M10400 via SP Flash Tool.

Packard Bell M10400 Firmware Flash File [MT8167 ROM]

Packard Bell M10400 Firmware Flash File [MT8167 ROM]:

And If Your Packard Bell M10400 might develop issue which might be unknown to it you. if it a software-related issue you can restore and fix it by flashing the Stock Firmware Files for Packard Bell M10400. Today we are presenting all the Official Firmware. both Official releases and updates following it. You can download all Packard Bell M10400 Stock ROM here. If you experience any problem with any of the files, don’t hesitate to tell us.

The Benefit Of Packard Bell M10400 Firmware:

  • Flash Stock To Unbrick your Packard Bell M10400
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Packard Bell M10400
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Packard Bell M10400
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Packard Bell M10400 Firmware Details:

  • Gapps File: Included
  • Device Supported: Packard Bell M10400
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT8167
  • Os: Android 8.1.0 Oreo
  Download File   Description
  Download Packard Bell M10400 MT8167 8.1.0.zip

Pre-Requirements To Flash Packard Bell M10400 Firmware:

Take a Backup:

Flashing Tool:

We will use Sp Flash Tool to flash Packard Bell M10400 as we use for Smile U2. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Packard Bell M10400.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.


How to install Packard Bell M10400 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Packard Bell M10400.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Packard Bell M10400 Firmware Flashing With Sp Flash Tool


  • Please read and understand the Full Guide Before Flashing Packard Bell M10400 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.