How To Flash Pomp W88S Firmware [ROM]

Pomp W88S Firmware

Here we will tell you how you can download Pomp W88S Firmware ROM file with all drivers and flash tools including a How to Flash guide.

This article contains the Pomp W88S Stock ROM. That will allow you to recover your Pomp W88S mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version.

You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device, and also come back that device to the factory state.

Pomp King W88S – Specifications

Dimensions: 74 x 143 x 9 mm
Weight: 158 g
SoC: MediaTek MT6589T
CPU: ARM Cortex-A7, 1500 MHz, Cores: 4
GPU: PowerVR SGX544 MP, 357 MHz, Cores: 1
Storage: 32 GB
Memory cards: microSD, microSDHC
Display: 5 in, IPS, 720 x 1280 pixels, 24 bit
Battery: 1700 mAh, Li-Ion
OS: Android 4.2 Jelly Bean
Camera: 3264 x 2448 pixels
SIM card: Micro-SIM
Wi-Fi: b, g, n, Wi-Fi Hotspot
USB: 2.0, Micro USB
Bluetooth: 2.1
Positioning: GPS, A-GPS

The Benefit Of Stock Firmware:

  • Flash Stock To Unbrick your Pomp W88S
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Pomp W88S
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Pomp W88S
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Pomp W88S Firmware:

Take a Backup:

Pomp W88S Flashing Tool:

We will use Sp Flash Tool to flash Pomp W88S firmware. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Pomp W88S.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Pomp W88S Driver:

How to Install Stock Firmware on Pomp W88S:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download Pomp W88S Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Pomp W88S Firmware Flashing With Sp Flash Tool


  • Please read and understand the Full Guide Before Flashing Pomp W88S Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Pomp W88S Firmware Details:

  • Gapps File: Included
  • Device Supported: Pomp W88S
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6589
  • Os: Android 4.2.2


Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More