Remi M200 Firmware Flash File [Stock ROM]

Remi M200 Firmware

If you have a Remi M200 smartphone. And you want Remi M200 Firmware to solve your bricked device. then you definitely are in the best article/post. We will guide you to install the official Remi M200 Stock Firmware on the device. This step is simple and straightforward to follow.

How To Flash Remi M200 Firmware File

A Soft Brick on Remi M200 is usually just when your Remi M200 is stuck in a boot loop, and as the name implies, it is caused by a software error on Remi M200, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “stock ROM on Remi M200″ through recovery or with SP Flash Tool.

The Benefit Of Stock ROM:

  • Flash Stock To Unbrick your Remi M200
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-Requirements To Flash Remi M200 Firmware:

A. Install Remi M200 ADB & Fastboot on Your Computer:

MediaTek VCOM driver is essential if you want to flash your Mediatek device with the SP flash tool. If you don’t have it installed, you simply can’t use the SP flash tool in flashing your MTK devices.

Just download the MTK Android USB Drivers latest version and setup.

B. Remi M200 Flash Tool:

Smart Phone Flash Tool (SP flash tool) offers Android phone owners a user-friendly interface, designed specifically to make things slightly easier when it comes to flashing a custom ROM on the handset.

It is a powerful tool for the advanced Android user and by advanced we mean those who know exactly what rooting and flashing can actually do to a MediaTek Android smartphone (MTK based).

It will not support the devices having chipsets other than MediaTek.

C. Take Full backup Of Remi M200:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Remi M200 it is important to take full Remi M200 backup and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Remi M200 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download Remi M200 Firmware.
  4. Switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. Remi M200 firmware flashing process will start automatically
  11. When flashing is completed, a green ring will appear in the SP flash tool.
  12. Close the SP flash tool on your computer and unplug the phone.

Now Power on the phone the first boot can take up to 5 minutes so keep patient.

Follow Detailed Instruction Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Remi M200 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Remi M200 ROM Details

Pros

  • Gapps File: Included
  • Device: Remi M200
  • Flash Tool: SP Flash Tool
  • MediaTek: MT6572
  • Os: Android 4.4.2

Cons

  • No Root
  • No Twrp
  • No Tweaks
  • No Overclocking
  • No Customizations

Remi_M200_MT6572_20180427_4.4.2.zip

Remi_M200_MT6572_20180717_4.4.2.zip

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More