How To Flash Doov A10 Firmware File [Marshmallow ROM]

Doov D50 Firmware

Today we have a good new News for Doov A10 users, Now you can download Doov A10 Firmware. If you are searching stock Firmware for Doov A10 So you are in right place.

Here we will completely guide you on how to Install Official Stock Firmware Flash File on Doov A10 via SP Flash Tool.

This article contains the Doov A10 Firmware. That will allow you to recover your Doov A10 mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device, and also come back that device to the factory state.

The Benefit Of Stock Firmware:

  • Flash Stock To Unbrick your Doov A10
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Doov A10
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Doov A10
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Doov A10 Firmware:

Take a Backup:

Doov A10 Flashing Tool:

We will use Sp Flash Tool to flash Doov A10 firmware as we use for Doov A11. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Doov A10.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom, and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices.

This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Doov A10 Driver:

How to Install Stock Firmware on Doov A10:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Doov A10 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to download button in SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Doov A10 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Doov A10 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Doov A10 Firmware Details:

  • Gapps File: Included
  • Device Supported: Doov A10
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6737T
  • Os: Android 6.0 Marshmallow

Download

Check Also

SANTIN Life Shine Stock Firmware

SANTIN Life Shine Stock Firmware Flash File (MT6739 – Android 7.1)

Are you looking for an easy and fast way to flash SANTIN Life Shine firmware …

Leave a Reply

Your email address will not be published. Required fields are marked *