Hiwire H1 Stock Firmware File [ROM]

Hiwire H2 MT6580 Official Stock Firmware

If you have a Hiwire H1 smartphone. And you want Hiwire H1 Stock Firmware to solve your bricked device. then you definitely are in the best article/post. 

We will guide for you to install the official Hiwire H1 Stock Firmware on the device. This step is simple and straightforward to follow. 

We have listed the Hiwire H1 Flash File below. Download the Stock ROM file to repair your Hiwire H1.

How To Flash Hiwire H1 Firmware File

A Soft Brick on Hiwire H1 is usually just when your Hiwire H1 is stuck in a boot loop, and as the name implies, is caused by a software error on Hiwire H1, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “stock ROM on Hiwire H1″ through recovery or with SP Flash Tool.

The Benefit Of Hiwire H1 ROM:

  • Flash Stock To Unbrick your Hiwire H1
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-Requirements To Flash Hiwire H1 Firmware:

A. Install Hiwire H1 ADB & Fastboot on Your Computer:

MediaTek VCOM driver is essential if you want to flash your Mediatek device with the SP flash tool. If you don’t have it installed, you simply can’t use the SP flash tool in flashing your MTK devices.

 Just download the MTK Android USB Drivers latest version and setup.

B. Hiwire H1 Flash Tool:

Smart Phone Flash Tool (SP flash tool) offers Android phone owners a user-friendly interface, designed specifically to make things slightly easier when it comes to flashing a custom ROM on the handset.

It is a powerful tool for the advanced Android user and by advanced we mean those who know exactly what rooting and flashing can actually do to a MediaTek Android smartphone (MTK based).

It will not support the devices having chipsets other than MediaTek.

C. Take Full backup Of Hiwire H1:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Hiwire H1 it is important to take full Hiwire H1 backup and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Hiwire H1 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Hiwire H1 Firmware.
  4. Switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. Hiwire H1 firmware flashing process will start automatically
  11. When flashing is completed, a green ring will appear in the SP flash tool.
  12. Close the SP flash tool on your computer and unplug the phone.

Now Power on the phone the first boot can take up to 5 minutes so keep patient.

Follow Detailed Instruction Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Hiwire H1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

[adinserter block=”6″]

Hiwire H1 ROM Details

Pros

  • Gapps File: Included
  • Device: Hiwire H1
  • Flash Tool: SP Flash Tool
  • MediaTek :MT6580
  • Os: Android 5.1

Cons

  • No Root
  • No Twrp
  • No Tweaks
  • No Overclocking
  • No Customizations

Download

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.