How To Flash Inovo Sstx I401 Firmware [ROM]

If you’re looking for the Inovo Sstx I401 Firmware. you need to flash, it can sometimes be difficult to locate online. For Inovo Sstx I401. In this Article/Tutorial about Unbrick Inovo Sstx I401. And download Flash Files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To install Stock ROM on Inovo Sstx I401 Mediatek Based Devices.

Inovo I458 Wonder Plus Firmware

This article contains the Inovo Sstx I401 Firmware. That will allow you to recover your Inovo Sstx I401 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

The Benefit Of Inovo Sstx I401 Firmware:

  • Flash Stock To Unbrick your Inovo Sstx I401
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Inovo Sstx I401
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Inovo Sstx I401
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Inovo Sstx I401 Firmware Details:

  • Gapps File: Included
  • Device Supported: Inovo Sstx I401
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6580
  • Os: Android 6.0 Marshmallow

Inovo_Sstx_I401_MT6580_20170216_6.0.zip

Pre-Requirements To Flash Inovo Sstx I401 Firmware:

Take a Backup:

Inovo Sstx I401 Flashing Tool:

We will use Sp Flash Tool to flash Inovo Sstx I401 firmware as we use for Inovo Sstx I458. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Inovo Sstx I401.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Inovo Sstx I401 Driver:

How to install Firmware on Inovo Sstx I401:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download Inovo Sstx I401 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Inovo Sstx I401 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Inovo Sstx I401 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More