Home Samsung Samsung Galaxy J2 SM-J200M Binary 2 Stock Firmware File

Samsung Galaxy J2 SM-J200M Binary 2 Stock Firmware File [ROM]

Samsung Galaxy J2 SM-J200M Binary 2

The specific Samsung Galaxy J2 SM-J200M Binary 2 Stock Firmware Download Package comes with a Stock ROM of Samsung Galaxy J2 SM-J200M Binary 2. This helps you to bypass FRP lock and revert form root and custom ROM.

Samsung Galaxy J2 SM-J200M Binary 2 Firmware Flash File [Stock ROM]

There are various reasons to flash “Stock Firmware on Samsung Galaxy J2 SM-J200M Binary 2“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Samsung Galaxy J2 SM-J200M Binary 2 Stock ROM:

  • Flash Stock ROM to unbrick your Samsung Galaxy J2 SM-J200M Binary 2
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Samsung Galaxy J2 SM-J200M Binary 2 Stock ROM Details:

  • Gapps: Included
  • Device Supported: Samsung Galaxy J2 SM-J200M Binary 2
  • Tool Supported: Odin
  • Os Ver: Android 7.0 Nougat

Download:

  • Model / Model SM-J200M U2, S2 Binary 2
  • Region / Country / Country Brazil / Brazil
  • Language / Language Multi-Language / Language
  • Android Version 5.1.1 Lollipop
  • Operator / Operator Clean ZTO (no logo, carrier apps)
  • PDA J200MUBS2ARI2
  • CSC J200MZTO2ARI2
  • Product code ZTO
  • Build Date Tue, 25 Sep 2018
  • Security Patch Level 2017-08-01 (1 August 2019)
  • Size / Size 1 GB

Download:

Pre-requirements to Install Samsung Galaxy J2 SM-J200M Binary 2 Stock ROM

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing or updating the firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

How To Install Samsung Galaxy J2 SM-J200M Binary 2 Firmware Update

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Samsung Galaxy J2 SM-J200M Binary 2 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Samsung Galaxy J2 SM-J200M Binary 2 Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Samsung Galaxy J2 SM-J200M Binary 2 Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Samsung Galaxy J2 SM-J200M Binary 2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on Samsung Galaxy J2 SM-J200M Binary 2 must have a 70–80% charge.

LEAVE A REPLY

Please enter your comment!
Please enter your name here