How To Flash Motorola Droid Razr HD XT926 Firmware File

Welcome to Motorola Droid Razr HD XT926 Firmware flash page. In this post, we will guide you on how to revert form custom ROM, unroot and install Droid Razr HD XT926 Stock ROM.

Motorola Droid Razr HD XT926 Firmware

The Benefit Of Motorola Droid Razr HD XT926 Stock ROM:

You’ll find these below Motorola Droid Razr HD XT926 Stock ROM useful if you have used the flashed customized builds on the device. Brick your device, change your device, and also come back that device to the factory state.

  • Keeps Rebooting
  • Update Motorola Droid Razr HD XT926 and downgrade
  • Unbrick Motorola Droid Razr HD XT926
  • To bypass FRP Lock on Motorola Droid Razr HD XT926
  • Boots Straight Into Recovery
  • Boots Straight Into its Bootloader
  • Freeze at the startup screen or boot Animation

Pre-Requirements To Flash Motorola Droid Razr HD XT926 Stock ROM:

A. Install Motorola Droid Razr HD XT926 ADB & Fastboot on Your Computer:

First, you’ll have to install Motorola Droid Razr HD XT926 Drivers on your computer, which are the utilities that let you flash images using Fastboot commands or Motorola RSD Lite.

There are several “one-click” and “light” versions of ADB and Fastboot made by third-parties, but I wouldn’t recommend using these because they’re not updated as frequently as the official utilities.

So they might not be fully compatible with newer devices. So download the MotorolaDeviceManager_2.5.4.exe latest version and setup.

B. Motorola Droid Razr HD XT926 Flash Tool:

We will use Motorola RSD Lite to flash Motorola Droid Razr HD XT926. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Motorola Droid Razr HD XT926.

C. Take Full backup Of Motorola Droid Razr HD XT926:

To ensure that you do not lose your data, it is essential to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Motorola Droid Razr HD XT926, it is important to take full Motorola Droid Razr HD XT926 backup, and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Flash Motorola Droid Razr HD XT926 Firmware With Motorola RSD Lite:

Method 1:

1. First of all, Download  RSD Lite Tool Setup and install it on your computer.

2. Once the installation is completed, launch the RSD Tool on your Computer.

3. Now, Click on the Browse button and locate the Motorola Droid Razr HD XT926 Firmware.

Browse button and locate the Motorola Droid Razr HD XT926 Firmware

4. Once you have successfully added the firmware, the complete file properties will be shown on the right panel.

Successfully added the Motorola Droid Razr HD XT926 firmware

5. Now, Connect your Motorola Droid Razr HD XT926 to the Computer (make sure it is in fastboot mode. To boot into fastboot mode: Press Volume Down + Power button).

6. Once your device is Motorola Droid Razr HD XT926 connected to the computer, it will be shown in the device list area.

Motorola Droid Razr HD XT926 connected

7. Click on the Start button to begin the Flashing or installing process.

8. Flashing or Installing Motorola Droid Razr HD XT926 Firmware may take up to 5-10 minutes to complete (depends on the size of the firmware).

9. When Flashing process is completed, you will be able to see the Finished Message

10. Disconnect your Motorola Droid Razr HD XT926 from the computer and restart it.

Method 2:

1. Download mfastboot.zip file.

2. Extract Motorola Droid Razr HD XT926 Firmware and mfastboot to the same folder you can easily locate. The firmware file comes in an xml.zip

3. Power off your phone Motorola Droid Razr HD XT926.

4. Reboot your phone to bootloader or use this command to boot to bootloader

adb reboot-bootloader

5. In the mfastboot folder, open ADB command file or command prompt.

6. Enter these commands one after the other to flash the firmware.

The command-line system.img_sparsechunks may differ. Confirm by checking the firmware folder. And at the last command, your phone will reboot.

The first booting may take time to boot. If the firmware is in, tar.gz extension, you can flash it by using this command in your cmd flashall.bat /EU

Motorola Droid Razr HD XT926 Stock Firmware Details:

  • Model Name: Motorola XT1080
  • Gapps: Included
  • Tool Supported: RSD Lite Motorola Flash Tool

Disclaimer:

  • Read the Full Guide Before Flashing Motorola Droid Razr HD XT926 Stock ROM.
  • Use these instructions at your own risk.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.