Home Motorola Motorola Moto G8 Plus XT2019-2 (DOHA) Firmware File

Motorola Moto G8 Plus XT2019-2 (DOHA) Firmware File [ROM]

Motorola Moto G8 Plus XT2019-1

Motorola Moto G8 Plus XT2019-2 (DOHA) Android 9 Pie RETLA Latin America (PPI29.65-51)

Welcome to Motorola Moto G8 Plus XT2019-2 Firmware flash page. In this post, we will guide you on how to revert form custom ROM, unroot, and install Moto G8 Plus XT2019-2 (DOHA) Stock ROM.

The Benefit Of Stock ROM:

You’ll find these below Motorola Moto G8 Plus XT2019-2 Stock ROM useful if you have used the flashed customized builds on the device. Brick your device, change your device, and also come back that device to the factory state.

  • Keeps Rebooting
  • Update and downgrade
  • Unbrick
  • To bypass FRP Lock on Motorola Moto G8 Plus XT2019-2
  • Boots Straight Into Recovery
  • Boots Straight Into its Bootloader
  • Freeze at the startup screen or boot Animation

Pre-Requirements To Flash Motorola Moto G8 Plus XT2019-2 Stock ROM:

A. Install Motorola Moto G8 Plus XT2019-2 ADB & Fastboot on Your Computer:

First, you’ll have to install Motorola Moto G8 Plus XT2019-2 Drivers on your computer, which are the utilities that let you flash images using Fastboot commands or Motorola RSD Lite.

There are several “one-click” and “light” versions of ADB and Fastboot made by third-parties, but I wouldn’t recommend using these because they’re not updated as frequently as the official utilities.

So they might not be fully compatible with newer devices. So download the Motorola Device Manager 2.5.4.exe latest version and setup.

B. Motorola Moto G8 Plus XT2019-2 Flash Tool:

We will use Motorola RSD Lite to flash Motorola Moto G8 Plus XT2019-2. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Motorola Moto G8 Plus XT2019-2.

C. Take Full backup Of Motorola Moto G8 Plus XT2019-2:

To ensure that you do not lose your data, it is essential to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take a full backup of Motorola Moto G8 Plus XT2019-2, it is important to take full Motorola Moto G8 Plus XT2019-2 backup, and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Flash Motorola Moto G8 Plus XT2019-2 Firmware With Motorola RSD Lite:

Method 1:

1. First of all, Download  RSD Lite Tool Setup and install it on your computer.

2. Once the installation is completed, launch the RSD Tool on your Computer.

3. Now, Click on the Browse button and locate the Motorola Moto G8 Plus XT2019-2 Firmware.

Browse button and locate the Motorola Moto E3 XT1700 Firmware

4. Once you have successfully added the firmware, the complete file properties will be shown on the right panel.

Successfully added the Motorola Moto E3 XT1700 firmware

5. Now, Connect your Motorola Moto G8 Plus XT2019-2 to the Computer (make sure it is in fastboot mode. To boot into fastboot mode: Press Volume Down + Power button).

6. Once your device is Motorola Moto G8 Plus XT2019-2 connected to the computer, it will be shown in the device list area.

Motorola Moto E3 XT1700 connected

7. Click on the Start button to begin the Flashing or installing process.

8. Flashing or Installing Motorola Moto G8 Plus XT2019-2 Firmware may take up to 5-10 minutes to complete (depends on the size of the firmware).

9. When Flashing process is completed, you will be able to see the Finished Message

10. Disconnect your Motorola Moto G8 Plus XT2019-2 from the computer and restart it.

Method 2:

1. Download mfastboot.zip file.

2. Extract ‘Motorola Moto G8 Plus XT2019-2 Firmware’ and mfastboot to the same folder you can easily locate. The firmware file comes in an xml.zip

3. Power off your phone Motorola Moto G8 Plus XT2019-2.

4. Reboot your phone to bootloader or use this command to boot to bootloader

adb reboot-bootloader

5. In the mfastboot folder, open ADB command file or command prompt.

6. Enter these commands one after the other to flash the firmware.

The command-line system.img_sparsechunks may differ. Confirm by checking the firmware folder. And at the last command, your phone will reboot.

The first booting may take time to boot. If the firmware is in, tar.gz extension, you can flash it by using this command in your cmd flashall.bat /EU

Motorola Moto G8 Plus XT2019-2 Stock Firmware Details:

Download Stock Rom / Firmware for Lenovo / Motorola Moto G G8 Plus

Model XT2019-2
Region Latin America / Latin America RETLA
Language Multi-language
Android Version 9 Pie
Operator / Operator Clean, Retail Latam (without logo, operator apps)
Size / Size 1.9 GB

Additional Information

  • SW Version: doha-user 9 PPI29.65-51 d187b release-keysM6125_06.09.02.10R
  • MBM Version: MBM-3.0-doha_retail-f85dc5f5f-200314
  • Modem Version: M6125_06.09.02.10R
  • FSG Version: FSG-6125 -01.54
  • Build Fingerprint: motorola / doha / doha: 9 / PPI29.65-51 / d187b: user / release-keys


  • System Version: 29.11.56.doha.retail.en.US
  • Model Number: moto g (8) plus
  • Android Version: 9
  • Baseband Version: M6125_06.09.02.10R
  • Build Id: PPI29. 65-51
  • SW Display Build ID: PPI29.65-51
  • Build Date: Sat Mar 14 07:51:36 CDT 2020


  • Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm
  • Regulatory Info (eLabel): regulatory_info_default.png
  • Blur Version: Blur_Version.29.11.56.doha.retail.en.US
  • Version when read from CPV: doha-user 9 PPI29 .65-51 d187b release-keys
  • AB Update Enabled: True
  • Full Treble Enabled: True


  • Read the Full Guide Before Flashing “Motorola Moto G8 Plus XT2019-2 Stock ROM”.
  • Use these instructions at your own risk.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.


RETLA / XT2019-2_DOHA_OPENLA_9.0_PPI29.65-51

4File     Google Drive     Android File Host


Please enter your comment!
Please enter your name here