Home Motorola How To Flash Motorola Razr D1 XT918 Firmware File

How To Flash Motorola Razr D1 XT918 Firmware File

Welcome to Motorola Razr D1 XT918 Firmware flash page. In this post, we will guide you on how to revert form custom ROM, unroot and install Motorola Razr D1 XT918 Stock ROM.

Motorola Razr D1 XT918 Firmware

The Benefit Of Motorola Razr D1 XT918 Stock ROM:

You’ll find these below Motorola Razr D1 XT918 Stock ROM useful if you have used the flashed customized builds on the device. Brick your device, change your device, and also come back that device to the factory state.

  • Keeps Rebooting
  • Update Motorola Razr D1 XT918 and downgrade
  • Unbrick Motorola Razr D1 XT918
  • To bypass FRP Lock on Motorola Razr D1 XT918
  • Boots Straight Into Recovery
  • Boots Straight Into its Bootloader
  • Freeze at the startup screen or boot Animation

Pre-Requirements To Flash Motorola Razr D1 XT918 Stock ROM:

A. Install Motorola Razr D1 XT918 ADB & Fastboot on Your Computer:

First, you’ll have to install Motorola Razr D1 XT918 Drivers on your computer, which are the utilities that let you flash images using Fastboot commands or Motorola RSD Lite.

There are several “one-click” and “light” versions of ADB and Fastboot made by third-parties, but I wouldn’t recommend using these because they’re not updated as frequently as the official utilities.

So they might not be fully compatible with newer devices. So download the MotorolaDeviceManager_2.5.4.exe latest version and setup.

B. Motorola Razr D1 XT918 Flash Tool:

We will use Motorola RSD Lite to flash Motorola Razr D1 XT918. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Motorola Razr D1 XT918.

C. Take Full backup Of Motorola Razr D1 XT918:

To ensure that you do not lose your data, it is essential to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Motorola Razr D1 XT918, it is important to take full Motorola Razr D1 XT918 backup, and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Flash Motorola Razr D1 XT918 Firmware With Motorola RSD Lite:

Method 1:

1. First of all, Download  RSD Lite Tool Setup and install it on your computer.

2. Once the installation is completed, launch the RSD Tool on your Computer.

3. Now, Click on the Browse button and locate the Motorola Razr D1 XT918 Firmware.

Browse button and locate the Motorola Razr D1 XT918 Firmware

4. Once you have successfully added the firmware, the complete file properties will be shown on the right panel.

Successfully added the Motorola Razr D1 XT918 firmware

5. Now, Connect your Motorola Razr D1 XT918 to the Computer (make sure it is in fastboot mode. To boot into fastboot mode: Press Volume Down + Power button).

6. Once your device is Motorola Razr D1 XT918 connected to the computer, it will be shown in the device list area.

Motorola Razr D1 XT918 connected

7. Click on the Start button to begin the Flashing or installing process.

8. Flashing or Installing Motorola Razr D1 XT918 Firmware may take up to 5-10 minutes to complete (depends on the size of the firmware).

9. When Flashing process is completed, you will be able to see the Finished Message

10. Disconnect your Motorola Razr D1 XT918 from the computer and restart it.

Method 2:

1. Download mfastboot.zip file.

2. Extract Motorola Razr D1 XT918 Firmware and mfastboot to the same folder you can easily locate. The firmware file comes in an xml.zip

3. Power off your phone Motorola Razr D1 XT918.

4. Reboot your phone to bootloader or use this command to boot to bootloader

adb reboot-bootloader

5. In the mfastboot folder, open ADB command file or command prompt.

6. Enter these commands one after the other to flash the firmware.

The command-line system.img_sparsechunks may differ. Confirm by checking the firmware folder. And at the last command, your phone will reboot.

The first booting may take time to boot. If the firmware is in, tar.gz extension, you can flash it by using this command in your cmd flashall.bat /EU

Motorola Razr D1 XT918 Stock Firmware Details:

  • Model Name: Motorola XT1080
  • Android Version: 4.1
  • ROM Size: 1 GB
  • Gapps: Included
  • Tool Supported: RSD Lite Motorola Flash Tool


  • Read the Full Guide Before Flashing Motorola Razr D1 XT918 Stock ROM.
  • Use these instructions at your own risk.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.


Please enter your comment!
Please enter your name here