Multilaser MS50X Stock Firmware File [ROM]

Multilaser MS50X Stock Firmware File

If you’re looking for the Multilaser MS50X Stock Firmware. you need to flash, it can sometimes be difficult to locate online For Multilaser MS50X. 

In this Article/Tutorial about Unbrick Multilaser MS50X. And download Flash Files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To install Stock ROM on Multilaser MS50X Mediatek Based Devices.

The Multilaser MS50X is a simple Android smartphone, but with full functionality, but still offers few features for leisure and fun. The functionalities offered by the Multilaser MS50X are more or less those present in all the most advanced devices, starting with Wi-fi connectivity and GPS

It also has an mp3 playerradiovideo conference and Bluetooth. We emphasize the good 16 GB with the possibility of expansion. Data transfer and web browsing are provided over the UMTS network but do not support newer technologies, such as HSDPA.

It has one huge screen touchscreen of 5.5 inches with a resolution of 960×480 pixel which is not the highest. The Multilaser MS50X is a product with few competitors in terms of multimedia thanks to the 8-megapixel camera that allows the Multilaser MS50X to take fantastic photos with a resolution of 3264×2448 pixels and record videos in high definition ( Full HD ) with a resolution of 1920×1080 pixels. Very thin, 9 mm, which makes the Multilaser MS50X really good for transport.

How To Flash Multilaser MS50X Firmware File

A Soft Brick on Multilaser MS50X is usually just when your Multilaser MS50X is stuck in a boot loop, and as the name implies, is caused by a software error on Multilaser MS50X, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “stock ROM on Multilaser MS50X” through recovery or with SP Flash Tool.

The Benefit Of Multilaser MS50X ROM:

  • Flash Stock To Unbrick your Multilaser MS50X
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-Requirements To Flash Multilaser MS50X Firmware:

A. Install Multilaser MS50X ADB & Fastboot on Your Computer:

MediaTek VCOM driver is essential if you want to flash your Mediatek device with the SP flash tool. If you don’t have it installed, you simply can’t use the SP flash tool in flashing your MTK devices.

 Just download the MTK Android USB Drivers latest version and setup.

B. Multilaser MS50X Flash Tool:

Smart Phone Flash Tool (SP flash tool) offers Android phone owners a user-friendly interface, designed specifically to make things slightly easier when it comes to flashing a custom ROM on the handset.

It is a powerful tool for the advanced Android user and by advanced we mean those who know exactly what rooting and flashing can actually do to a MediaTek Android smartphone (MTK based).

It will not support the devices having chipsets other than MediaTek.

C. Take Full backup Of Multilaser MS50X:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Multilaser MS50X it is important to take full Multilaser MS50X backup and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Multilaser MS50X Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Multilaser MS50X Firmware.
  4. Switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. Multilaser MS50X firmware flashing process will start automatically
  11. When flashing is completed, a green ring will appear in the SP flash tool.
  12. Close the SP flash tool on your computer and unplug the phone.

Now Power on the phone the first boot can take up to 5 minutes so keep patient.

Follow Detailed Instruction Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Multilaser MS50X Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

[adinserter block=”6″]

[joomdev-wpc-pros-cons disable_title=”no” wpc_style=”wppc-view1″ title_tag=”H3″ title=”Multilaser MS50X ROM Details” pros_title=”Pros” cons_title=”Cons” button_text=”Get it now” disable_button=”yes” button_link=”” button_link_target=”_SELF” button_rel_attr=”dofollow”][joomdev-wpc-pros]

  • Gapps File: Included
  • Device: Multilaser MS50X
  • Flash Tool: SP Flash Tool
  • MediaTek : MT6739
  • Os: Android 5.1

[/joomdev-wpc-pros][joomdev-wpc-cons]

  • No Root
  • No Twrp
  • No Tweaks
  • No Overclocking
  • No Customizations

[/joomdev-wpc-cons][/joomdev-wpc-pros-cons]

Download

Leave a Reply

Your email address will not be published. Required fields are marked *