Home Pixus Pixus Hit 2 Stock Firmware File

Pixus Hit 2 Stock Firmware File [ROM]

Pixus Hit 2 Stock Firmware File

Searching for a working Pixus Hit 2  firmware could be tiring and frustrating when there are plenty of choices available on the internet. Here we will tell you how you can download Pixus Hit 2 stock firmware ROM file with all drivers and flash tool including a How to Flash guide.

How To Flash Pixus Hit 2 Firmware File

A Soft Brick on Pixus Hit 2 is usually just when your Pixus Hit 2 is stuck in a boot loop, and as the name implies, is caused by a software error on Pixus Hit 2, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “stock ROM on Pixus Hit 2″ through recovery or with SP Flash Tool.

The Benefit Of Pixus Hit 2 ROM:

  • Flash Stock To Unbrick your Pixus Hit 2
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-Requirements To Flash Pixus Hit 2 Firmware:

A. Install Pixus Hit 2 ADB & Fastboot on Your Computer:

MediaTek VCOM driver is essential if you want to flash your Mediatek device with the SP flash tool. If you don’t have it installed, you simply can’t use the SP flash tool in flashing your MTK devices.

 Just download the MTK Android USB Drivers latest version and setup.

B. Pixus Hit 2 Flash Tool:

Smart Phone Flash Tool (SP flash tool) offers Android phone owners a user-friendly interface, designed specifically to make things slightly easier when it comes to flashing a custom ROM on the handset.

It is a powerful tool for the advanced Android user and by advanced we mean those who know exactly what rooting and flashing can actually do to a MediaTek Android smartphone (MTK based).

It will not support the devices having chipsets other than MediaTek.

C. Take Full backup Of Pixus Hit 2:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Pixus Hit 2 it is important to take full Pixus Hit 2 backup and its IMEI just read the below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Pixus Hit 2 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Pixus Hit 2 Firmware.
  4. Switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. Pixus Hit 2 firmware flashing process will start automatically
  11. When flashing is completed, a green ring will appear in the SP flash tool.
  12. Close the SP flash tool on your computer and unplug the phone.

Now Power on the phone the first boot can take up to 5 minutes so keep patient.

Follow Detailed Instruction Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Pixus Hit 2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Pixus Hit 2 ROM Details

Pros

  • Gapps File: Included
  • Device: Pixus Hit 2
  • Flash Tool: SP Flash Tool
  • MediaTek : MT6580
  • Os: Android 6.0

Cons

  • No Root
  • No Twrp
  • No Tweaks
  • No Overclocking
  • No Customizations

Download

LEAVE A REPLY

Please enter your comment!
Please enter your name here