How To Flash Weiimi P8s Firmware [Stock ROM]

0

Weiimi P8s Stock ROM

We are going to Flash Weiimi P8s Firmware. In this guide, we have used Sp Flash Tool to flash the Stock Firmware on Weiimi P8s. And we include the Official link to Download Weiimi P8s Stock ROM and all Needed Files.  

your device may get bricked And flashing stock ROM is the only way to go out. To perform this advanced process of Flashing Stock ROM please Go Step by step. If you got any error then leave a comment.

This article contains the Weiimi P8s Firmware. That will allow you to recover your Weiimi P8s mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device, and also come back that device to the factory state.

The Benefit Of  Stock Firmware:

  • Flash Stock To Unbrick your Weiimi P8s
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Weiimi P8s
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Weiimi P8s
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Weiimi P8s Firmware:

Take a Backup:

Weiimi P8s Flashing Tool:

We will use Sp Flash Tool to flash Weiimi P8s firmware as we use for Weiimi P8. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Weiimi P8s.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Weiimi P8s Driver:

How to Install Firmware on Weiimi P8s:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Weiimi P8s Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Weiimi P8s Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Weiimi P8s Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Weiimi P8s Firmware Details:

  • Gapps File: Included
  • Device Supported: Weiimi P8s
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6752
  • Os: Android 4.4.4 Kitkat

Download

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More