How To Flash Weiimi P9S Firmware File [Stock ROM]

0

Weiimi P9 Yunos Firmware

In case you’ve bricked your Weiimi P9S or simply Wish to clean install the Weiimi P9S Firmware then you definitely are in the best place. Weiimi P9S is based on MTK CPU. To install the Stock firmware on Weiimi P9S MediaTek powered device, you require Flashing Tool known as Sp Flash Tool, Formally also called SmartPhone Flashing Tool.

Download the Weiimi P9S Stock Firmware, drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on Weiimi P9S.

This article contains the Weiimi P9S Firmware. That will allow you to recover your Weiimi P9S mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version.

You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device, and also come back that device to the factory state.

The Benefit Of Weiimi P9S Firmware:

  • Flash Stock To Unbrick your Weiimi P9S
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Weiimi P9S
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Weiimi P9S
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash Weiimi P9S Firmware:

Take a Backup:

Weiimi P9S Flashing Tool:

We will use Sp Flash Tool to flash Weiimi P9S firmware as we use for Weiimi P9 Multilang. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Weiimi P9S.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Weiimi P9S Driver:

How to Install Stock Firmware on Weiimi P9S:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download Weiimi P9S Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Weiimi P9S Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Weiimi P9S Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Weiimi P9S Firmware Details:

  • Gapps File: Included
  • Device Supported: Weiimi P9S
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6752
  • Os: Android 4.4.4 Kitkat

Download

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More