Home Sky SKY Platinum 4.0 Firmware Flash File

SKY Platinum 4.0 Firmware Flash File [Marshmallow ROM]

243
0

Download Official Stock SKY Platinum 4.0 Firmware Flash File. If you have SKY Platinum 4.0 Smartphone and You want to download the Stock ROM. Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.

SKY Platinum 4.0 Firmware Flash File [Marshmallow ROM]

Take advantage of the time! 1.2GHz Quad-Core processor allows your smartphone to run the latest, greatest, and most complex apps. The new Platinium 4.0 has just the perfect size. A 4” inch screen with great resolution. A battery that works smarter. With the latest OS Android Marshmallow 6.0, you can save your juice for what
matters most.

SKY Platinum 4.0 Technical Specs:

  • Display: 4.0″ WVGA 480×800 px
  • Platform: Quad Core 1.2 GHz
  • Operating System: Android 7.0
  • Bands: 2G 850/900/1800/1900 3G 850/1900/2100
  • Memory: 4GB ROM + 512MB RAM
  • Camera: 5MP Back Camera
  • Battery: 1300 mAh; Standby 150 hrs. Talk Time 6 hrs.
  • Dimensions: 124 x 64.6 x 10.6mm

SKY Platinum 4.0 Firmware Flash File [Marshmallow ROM]:

This article contains the SKY Platinum 4.0 Firmware Flash Files. That will allow you to recover your SKY Platinum 4.0 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

We will use the SPD Flash Tool to unbrick the SKY Platinum 4.0. This tool is really very efficient. Just follow the step by step procedure to use One Click Unbrick Tool and unbrick your SKY Platinum 4.0.

The Benefit Of SKY Platinum 4.0 Firmware:

  • SKY Platinum 4.0 Keeps Rebooting;
  • SKY Platinum 4.0 Boots Straight Into Recovery;
  • SKY Platinum 4.0 Boots Straight Into its Bootloader;
  • SKY Platinum 4.0 Freeze at the startup screen or boot Animation;

SKY Platinum 4.0 Firmware Details:

  • Gapps File: Included
  • Device Supported: SKY Platinum 4.0
  • Tool Supported: SPD Upgrade Tool
  • Processor: SPD-SC7731 
  • Os: Android 6.0 Marshmallow
Download File Description
Download SKY Platinum 4.0 Firmware Flash Files.zip

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing SKY Platinum 4.0 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Erroron SKY Platinum 4.0: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI on SKY Platinum 4.0: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Take a Backup:

Pre-Requirements To Flash SKY Platinum 4.0 Firmware:

  • Supported Phone: SKY Platinum 4.0
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • SKY Platinum 4.0 Download Tool: Download the latest SPD Download Tool  and extract it (Install)
  • SKY Platinum 4.0 Spreadtrum Drivers: Get Spreadtrum Drivers. and set up on your pc.

Instructions to Install SKY Platinum 4.0 Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the SKY Platinum 4.0 firmware.PAC file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction SKY Platinum 4.0 Firmware Flashing With Spreadtrum Upgrade Tool.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.