How To Flash Samsung Galaxy Core 4 SM-J410G Binary 1 Stock Firmware

Today we have a good new News for Samsung Galaxy Core 4 SM-J410G Binary 1 users, Now you can download and install the Official Stock firmware on Samsung Galaxy Core 4 SM-J410G Binary 1 smartphone.

If you are searching stock Firmware for Samsung Galaxy Core 4 SM-J410G Binary 1 So you are in right place. Here we will completely guide you on how to Install Stock ROM File on Samsung Galaxy Core 4 SM-J410G Binary 1 via Odin Flash Tool.

Samsung Firmware

How To Flash Samsung Galaxy Core 4 SM-J410G Binary 1 Stock Firmware File

We are going to Flash Stock ROM on Samsung Galaxy Core 4 SM-J410G Binary 1. In this guide, we have used Odin Flash Tool to flash theStock Firmware on Samsung Galaxy Core 4 SM-J410G Binary 1″. And we include the Official link to Download Samsung Galaxy Core 4 SM-J410G Binary 1 Stock ROM and all Needed Files. 

Your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a comment.

The Benefit Of Samsung Galaxy Core 4 SM-J410G Binary 1 Stock ROM:

  • Flash Stock To Unbrick your Samsung Galaxy Core 4 SM-J410G Binary 1
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Samsung Galaxy Core 4 SM-J410G Binary 1 Stock ROM Details:

  • Model / Model SM-J410G U1, S1 Binary 1
  • Region / Country / Country Brazil / Brazil
  • Language / Language Multi Language / Language
  • Android Version 8.1.0 Oreo
  • Carrier / Operator Clean ZTO (no logo, carrier apps)
  • PDA J410GUBU1ASGH
  • CSC J410GOWO1ASH3
  • Product code ZTO
  • Build Date 29 Jul 2019
  • Security Patch Level 2019-08-01 (1 August 2019)
  • Size / Size 946 MB

Download: J410GUBU1ASGH_J410GOWO1ASH3_ZTO.zip

Pre-Requirements To Flash Samsung Galaxy Core 4 SM-J410G Binary 1 Firmware:

A. Install Samsung Galaxy Core 4 SM-J410G Binary 1 ADB & Fastboot on Your Computer:

Samsung USB Drivers allows you to connect your Samsung Smartphone and Tablets to the Windows computer without the need of installing the Samsung Kies application.

It also allows you to Flash Samsung Stock Firmware on your Samsung Device using the original drivers.

 Just download the Samsung Android USB Driver for Windows and setup.

B. Samsung Galaxy Core 4 SM-J410G Binary 1 Flash Tool Odin:

Odin3 is designed to flash Samsung smartphones with stock firmware packages. Custom ROMs rarely do flash with Odin, as this program does not recognize .zip extensions, but only .tar files.

C. Take Full backup Of Samsung Galaxy Core 4 SM-J410G Binary 1:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Samsung Galaxy Core 4 SM-J410G Binary 1 it is important to take full Samsung Galaxy Core 4 SM-J410G Binary 1 backup and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Samsung Galaxy Core 4 SM-J410G Binary 1 Stock Firmware:

1: The first step is to turn off your Samsung Galaxy Core 4 SM-J410G Binary 1 and connect it to your PC using a data cable.
2: Now put your phone into download mode by pressing and holding Bixby, Power, and Volume down buttons. When you see a warning on the screen of your phone release the buttons.
3: Press the Volume Up button to proceed to Download Mode.
4: Now open ODIN on your PC and connect your phone to your PC using the original data cable.

You will see your phone has a connection with your PC. The ID: COM on ODIN will change to blue. (If the color didn’t change, then the PC has failed to recognize your phone. Make sure you have installed the right drivers and the drivers were installed successfully. Sometimes the fault lies in the USB cable)

5: After your phone is connected. Click on PDA or on some ODIN versions it is AP.
6: Now select the .tar or .tar.md5 file from the files in extracted Samsung Galaxy Core 4 SM-J410G Binary 1 firmware.
7: Make sure only Auto Reboot and F.Reset Time are checked in the options tab of Odin.
8: Now if everything is ready. Press on Start.

It will take around 10 minutes to install stock firmware on Samsung Galaxy Core 4 SM-J410G Binary 1. If the flashing is unsuccessful due to some reason. Then try with some other version of Odin.
Finally, if the flashing is successful. Your phone will reboot and it will have the official stock firmware of Samsung.

Important Note:

If the Samsung Galaxy Core 4 SM-J410G Binary 1 firmware that you downloaded and extracted has more than one file then select the corresponding file in its specific tab in Odin. Identify the files from their extension type.

  • BL belongs to Bootloader
  • AP belongs to PDA
  • select CP in Phone(Modem)
  • CSC file in CSC tab.

For example, click on BL and select the file that starts with BL in the folder where you extracted the firmware. Finally, click on AP and select the file that starts with AP and do the same with the CP.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.