Home Stock Firmware How To Flash Smile Z7 EX Stock Firmware File

How To Flash Smile Z7 EX Stock Firmware File

There are countless guides and methods out there to flash Smile Z7 EX Stock Firmware, so where do you start? Where do you focus? Here is a quick article on the Smile Z7 EX Stock ROM file.

We shared with you how you can download original and working Smile Z7 EX Stock Firmware for your phone and we also gave a brief method on how you can do flash with the help of the computer.

MTK Stock Firmware Smile Z7 EX

How To Flash Smile Z7 EX Stock Firmware File

A Soft Brick on Smile Z7 EX is usually just when your Smile Z7 EX is stuck in a boot loop, and as the name implies, is caused by a software error on Smile Z7 EX, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the “stock ROM on Smile Z7 EX” through recovery or with SP Flash Tool.

The Benefit Of Smile Z7 EX Stock ROM:

  • Flash Stock To Unbrick your Smile Z7 EX
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Smile Z7 EX Stock ROM Details:

  • Gapps File: Included
  • Device Supported: Smile Z7 EX
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek – MT6572
  • Os: Android 4.4.2 Kitkat

Download: MT6572__SMILE__Z7__SMILE__4.4.2__ALPS.KK1.MP7.V1

Pre-Requirements To Flash Smile Z7 EX Firmware:

A. Install Smile Z7 EX ADB & Fastboot on Your Computer:

MediaTek VCOM driver is essential if you want to flash your Mediatek device with the SP flash tool. If you don’t have it installed, you simply can’t use the SP flash tool in flashing your MTK devices.

 Just download the MTK Android USB Drivers latest version and setup.

B. Smile Z7 EX Flash Tool:

Smart Phone Flash Tool (SP flash tool) offers Android phone owners a user-friendly interface, designed specifically to make things slightly easier when it comes to flashing a custom ROM on the handset.

It is a powerful tool for the advanced Android user and by advanced we mean those who know exactly what rooting and flashing can actually do to a MediaTek Android smartphone (MTK based).

It will not support the devices having chipsets other than MediaTek.

C. Take Full backup Of Smile Z7 EX:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Smile Z7 EX it is important to take full Smile Z7 EX backup and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Smile Z7 EX Stock Firmware:
  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Smile Z7 EX Firmware.
  4. Switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. Smile Z7 EX firmware flashing process will start automatically
  11. When flashing is completed, a green ring will appear in the SP flash tool.
  12. Close the SP flash tool on your computer and unplug the phone.

Now Power on the phone the first boot can take up to 5 minutes so keep patient.

Follow Detailed Instruction Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Smile Z7 EX Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

LEAVE A REPLY

Please enter your comment!
Please enter your name here