[Stock ROM] Akai PHA-3850 Firmware Flash File

By | October 5, 2018

[Stock ROM] Akai PHA-3850 Firmware Flash File

We are going to Flash Stock ROM on Akai PHA-3850. In this guide, we have used Sp Flash Tool to flash the Stock Firmware on Akai PHA-3850 And we include the Official link to Download Akai PHA-3850 Stock ROM and all Needed Files.  your device may get bricked And flashing Stock ROM is the only way to go out. To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a Comment.

[Stock ROM] Akai PHA-3850 Firmware Flash File:

We will use Sp Flash Tool to unbrick the Akai PHA-3850. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Akai PHA-3850.

Sp Flash Tool and it is used to Manually Upgrade or flash MTK Android Smartphone or tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on Media Tek Devices which comes in .zip Format. To use Smartphone Flashing tool with Akai PHA-3850 you first need to properly install the latest Vcom USB Drivers for Akai PHA-3850.

The Benefit Of er Stock ROM

  • Flash Stock To Unbrick your Akai PHA-3850
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Akai PHA-3850
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Akai PHA-3850
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Firmware Details:

  • Gapps File: Included
  • Device Supported: Akai PHA-3850
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6575
  • Os: Android 2.3.6 
Download File Description
Download Akai_PHA-3850_MT6575_31032017_2.3.6.zip

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Akai PHA-3850 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks!

It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM

Take a Backup:

Pre-Requirements To Flash Akai PHA-3850 Stock Firmware:

  • Supported Phone: Akai PHA-3850
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • SP Flash Tool: Download the latest SP Flash Tool and extract it (Install)
  • Vcom Drivers.: Get MTK Android USB Drivers. and set up on your pc.

Instructions to Install Firmware on Akai PHA-3850:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Firmware file/Flash file/Rom for your phone from below.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In download tab, click on scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug phone.
  12. Power on the phone and enjoy.
  13. After flashing process starts, it might take up to 510 minutes. So keep patience and wait.

Follow Detailed Instruction Flashing With Sp Flash Tool

Spread the love