How To Flash Tecno F4 Pro Stock ROM Firmware File

By | October 23, 2018

How To Flash Tecno F4 Pro Stock ROM Firmware File

If you have a Tecno F4 Pro smartphone and you want Tecno F4 Pro Stock ROM Firmware to solve your bricked device, then you definitely are in the best article/post. We will guide for you to install the official Tecno F4 Pro Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the Tecno F4 Pro Flash File below. Download the Stock ROM file to repair your Tecno F4 Pro.

How To Flash Tecno F4 Pro Stock ROM Firmware File

We will use Sp Flash Tool to unbrick the Tecno F4 Pro. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tecno F4 Pro.

The Benefit Of Tecno F4 Pro Stock ROM

There are a lot of benefits of having the stock ROM of a Tecno F4 Pro device. You can Fix Bootloop and Black screen issue by flashing back the stock firmware. If you are facing some software related issues on Tecno F4 Pro, then you can flash the stock ROM to fix that. You can Unbrick and unroot your Tecno F4 Pro by flashing back the stock firmware which will give you your device’s warranty back.

Firmware Details:

  • Gapps File: Included
  • Device Supported: Tecno F4 Pro
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6739
Download File Description
Download Tecno_F4_Pro_MT6739_V63_180711.zip

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Tecno F4 Pro Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Take a Backup:

Pre-Requirements To Flash Tecno F4 Pro Stock Firmware:

  • Supported Phone: Tecno F4 Pro
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • SP Flash Tool: Download the latest SP Flash Tool and extract it (Install)
  • Vcom Drivers: Get MTK Android USB Drivers. and set up on your pc.

Instructions to Install Firmware on Tecno F4 Pro:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Firmware file/Flash file/Rom for your phone from below.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In download tab, click on scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug phone.
  12. Power on the phone and enjoy.
  13. After flashing process starts, it might take up to 510 minutes. So keep patience and wait.

Follow Detailed Instruction Flashing With Sp Flash Tool

Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.