Tecno Spark K7 Firmware Flash File [Stock ROM]

Tecno Spark K7 Firmware Flash File

Today I will share Tecno k7 firmware flash file free download link with you. Also a detailed guide on how to flash Tecno k7 manually with scatter file using Sp flash tool. This helps you to unbrick and solve the Tecno k7 software related issue and revert from Tecno k7 custom ROM and unroot it.

Download Tecno Spark K7 Stock ROM from right here, flash Stock Firmware on your Tecno Spark K7 and benefit from the native Android expertise once more. The article contains the USB driver, flash tool, and the scatter file.

Tecno Spark K7 Firmware

Tecno Spark K7 Key Specs:

  • OS: HiOS 2.0 Based on Android 7.0 (Nougat)
  • SIM Type: Dual SIM (Micro)
  • 4G LTE: N
  • Screen Size: 5.5 Inches HD IPS Touchscreen
  • Screen Resolution: 720 x 1280 pixels
  • Processor Type: 1.3 GHz Octa-core CPU
  • RAM: 1GB
  • Internal Storage: 16 GB.
  • External Storage: microSD, up to 32 GB
  • Back / Rear Camera: 13MP camera & single LED Flash
  • Front Camera: 5MP with flash
  • Back-placed Fingerprint scanner
  • Battery: 3000 mAh Non-Removable

Download Official Stock Firmware Flash File For Tecno Spark K7. If you have Tecno Spark K7 Smartphone and You want to download the Stock ROM. Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.

[quads id=8]

The Benefit Of Stock Firmware:

  • Flash Stock To Unbrick your Tecno Spark K7
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Tecno Spark K7
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Tecno Spark K7
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Tecno Spark K7 Stock ROM Details:

  • Gapps File: Included
  • Device Supported: Tecno Spark K7
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek
  • Os: Android 7.0 Nougat

 

Pre-Requirements To Flash Tecno Spark K7 Firmware:

Take a Backup:

Flashing Tool:

We will use Sp Flash Tool to flash Tecno Spark K7 firmware as we use for QMobile LT500 Pro. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tecno Spark K7.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices.

This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Driver:

How to Install Firmware on Tecno Spark K7:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Tecno Spark K7 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the Tecno Spark K7 scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Tecno Spark K7 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Tecno Spark K7 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

[adinserter block=”6″]

Download

Tecno K7 Firmware 7.0.zip

Leave a Reply

Your email address will not be published. Required fields are marked *