Tecno W3X Firmware Flash File [Nougat ROM]

Tecno W3X MT6580 Android 7.0 Firmware Flash Files

Are you in search of the Tecno W3X Firmware? If sure of your reply, you might be on a suitable web page. We’ve given the direct link to download Tecno W3X Firmware. Download Tecno W3X Stock ROM from right here, flash Stock Firmware on your Tecno W3X and benefit from the native Android expertise once more. The article contains the USB driver, flash tool, and the scatter file.

Tecno W3X Firmware Flash File [Nougat ROM]

Tecno W3X Specs:

  • Operating System Type: Android
  • Storage Capacity: 8 GB
  • Number Of SIM: Dual SIM
  • Rear Camera Resolution: 5 MP
  • Mobile Phone Type: Smartphone
  • Cellular Network Technology: 3G
  • Chipset Manufacturer: MediaTek
  • Display Size (Inch) : 5 Inch
  • Model Number: W3X
  • Battery Capacity in mAh: 2500 Mah
  • Fast Charge: Yes
  • Memory RAM: 1 GB

Tecno W3X Firmware Flash File [Nougat ROM]:

This article contains the Tecno W3X. That will allow you to recover your Tecno W3X mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

[quads id=8]

The Benefit Of Tecno W3X Firmware:

  • Flash Stock To Unbrick your Tecno W3X
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Tecno W3X
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Tecno W3X
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Tecno W3X Firmware Details:

  • Gapps File: Included
  • Device Supported: Tecno W3X
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6580
  • Os: Android 7.0 Nougat
  Download File   Description
  Download  Tecno W3X Flash Files WX3-H8014AC-N-170511V92.zip

[quads id=9]

Pre-Requirements To Flash Tecno W3X Firmware:

Take a Backup:

Flashing Tool:

We will use Sp Flash Tool to flash Tecno W3X as we use for Tecno iClick IN6. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tecno W3X.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Driver:

How to install Tecno W3X Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Tecno W3X.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Tecno W3X Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Tecno W3X Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Leave a Reply

Your email address will not be published. Required fields are marked *