Vitu Mars 9 Firmware Flash File [SC7731 ROM]

If you’re looking for the Vitu Mars 9 Firmware. you need to flash, it can sometimes be difficult to locate online For Vitu Mars 9. In this Article/Tutorial about Unbrick Vitu Mars 9. And download Flash Files tested and working file. I have explained the method which is used by People or the Repairing Shops

Vitu Mars 9 Firmware Flash File [SC7731 ROM]

How To Flash VITU MARS 9 Stock Firmware File [SPD]

Sometime when we are trying to gain root access and installing CWMor TWRP recovery. Most people have bricked the VITU MARS 9, (Unbrick) with the Stock Firmware we can flash official firmware and bring our VITU MARS 9 to work anytime. Also if you think your VITU MARS 9 lag or has a problem, then flash the Stock Firmware from the list below and save from the situation. If we flash Stock ROM files it doesn’t void a warranty on your VITU MARS 9.

We will use the SPD Flash Tool to unbrick the VITU MARS 9. This tool is really very efficient. Just follow the step by step procedure to use One Click Unbrick Tool and unbrick your VITU MARS 9.

The Benefit Of VITU MARS 9 Stock ROM

A Soft Brick is usually just when you’re VITU MARS 9 is stuck in a boot loop, and as the name implies, is caused by a software error on VITU MARS 9, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on VITU MARS 9 through recovery or with SPD Flash Tool. If your VITU MARS 9 device turns to a soft-brick, it may:

  • VITU MARS 9 Keeps Rebooting;
  • VITU MARS 9 Boots Straight Into Recovery;
  • VITU MARS 9 Boots Straight Into its Bootloader;
  • VITU MARS 9 Freeze at the startup screen or boot Animation;


  • Please Read and understand the Full Guide Before Flashing VITU MARS 9 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Erroron VITU MARS 9: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI on VITU MARS 9: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Take a Backup:

Pre-Requirements To Flash VITU MARS 9 Stock Firmware:

  • Supported Phone: VITU MARS 9
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • VITU MARS 9 Download Tool: Download the latest SPD Download Tool and extract it (Install)
  • VITU MARS 9 Spreadtrum Drivers: Get Spreadtrum Drivers. and set up on your pc.

Instructions to Install Firmware on VITU MARS 9:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the VITU MARS 9 firmware.PAC file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction VITU MARS 9 Firmware Flashing With Spreadtrum Upgrade Tool.

Vitu Mars 9 Firmware Details:

  • Gapps File:
  • Included
  • Device Supported: VITU MARS 9
  • Tool Supported: SPD Upgrade Tool
  • Processor: SPD-SC7731
  • Os: Android 6.0 Marshmallow
Download File Description
Download Vitu Mars 9 firmware SC7731C V01 20181010 6.0

Viitu Mars9 Flash File Hang On Logo Fix Pac Firmware.7z

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More