Voto GT11 Pro Firmware File [Stock ROM]

If you have a Voto GT11 Pro smartphone. And you want Voto GT11 Pro Firmware to solve your bricked device. then you definitely are in the best article/post. We will guide for you to install the official Voto GT11 Pro Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the Voto GT11 Pro Flash File below. Download the Stock ROM file to repair your Voto GT11 Pro.

Voto GT11 Pro Firmware

This article contains the Voto GT11 Pro Firmware. That will allow you to recover your Voto GT11 Pro mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

The Benefit Of Voto GT11 Pro Firmware:

  • Flash Stock To Unbrick your Voto GT11 Pro
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Voto GT11 Pro
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Voto GT11 Pro
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Voto GT11 Pro Firmware Details:

  • Gapps File: Included
  • Device Supported: Voto GT11 Pro
  • Tool Supported: SPD Factory Upgrade Tool
  • Processor: SPD
  • Os: Android 5.1 Lollipop


Pre-Requirements To Flash Voto GT11 Pro Firmware:

Voto GT11 Pro Flashing Tool:

We will use the SPD Factory Upgrade Tool to flash Voto GT11 Pro firmware. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Voto GT11 Pro.

Voto GT11 Pro Driver:

How to install Firmware on Voto GT11 Pro:

  1. Install Spreadtrum Drivers.
  2. Install the SPD Download Tool.
  3. Open the Research download tool > bin folder.
  4. Launch ResearchDownload.exe.
  5. Click on the Load Packet icon (top left corner).
  6. In the window that pops up, navigate to the location of the Voto GT11 Pro Firmware.pac file, select it then click Open.
  7. The PAC file should now be loaded (its name should appear at the top).
  8. Click the Settings Icon (top left corner).
  9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  10. Click the Start downloading button.
  11. You should see Waiting…. under the Progress bar.
  12. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
  13. Once flashing is complete, you’ll see Passed.
  14. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction Voto GT11 Pro Firmware Flashing With Spreadtrum Upgrade Tool.


  • Bin Packet load Error: If you ever got Bin Packet Error When Flashing Voto GT11 Pro Firmware then simply download and try flashing the Voto GT11 Pro firmware with this version of SPD Upgrade Tool.
  • How to Write IMEI: After flashing the Voto GT11 Pro Firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Check Also

SANTIN Life Shine Stock Firmware

SANTIN Life Shine Stock Firmware Flash File (MT6739 – Android 7.1)

Are you looking for an easy and fast way to flash SANTIN Life Shine firmware …

Leave a Reply

Your email address will not be published. Required fields are marked *