How To Flash Voto IX20 Firmware File [Stock ROM]

How To Flash Voto IX20 Firmware File [Stock ROM]

Today we have a good new News for Voto IX20 users, Now you can download and install the Voto IX20 Firmware. If you are searching stock Firmware for Voto IX20 So you are in right place.

Here we will completely guide you how to Install Voto IX20 Firmware via SP Flash Tool.

Voto IX20 GT20 Firmware

This article contains the Voto IX20 Firmware. That will allow you to recover your Voto IX20 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Y

ou’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

The Benefit Of Voto IX20 Firmware:

  • Flash Stock To Unbrick your Voto IX20
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Voto IX20
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Voto IX20
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Voto IX20 Firmware Details:

  • Gapps File: Included
  • Device Supported: Voto IX20
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6737T
  • Os: Android 6.0 Marhsmallow

Pre-Requirements To Flash Voto IX20 Firmware:

Take a Backup:

Voto IX20 Flashing Tool:

We will use Sp Flash Tool to flash Voto IX20 Firmware. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Voto IX20.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Voto IX20 Driver:

How to install Firmware on Voto IX20:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Voto IX20 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Voto IX20 Firmware Flashing With Sp Flash Tool


  • Please Read and understand the Full Guide Before Flashing Voto IX20 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Share This


Wordpress (0)
Disqus ( )