Wiko Lenny 4 Firmware Flash File [MT6580 Nougat ROM]

Wiko Lenny 4

If you’re looking for the Wiko Lenny 4 Firmware. you need to flash, it can sometimes be difficult to locate online. For Wiko Lenny 4.

Wiko Lenny 4 Firmware Flash File [MT6580 Nougat ROM]

In this Article/Tutorial about Unbrick Wiko Lenny 4. And download Flash Files tested and working file.

I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To install Stock ROM on Wiko Lenny 4 Mediatek Based Devices.

Wiko Lenny 4 Key Features:

  • Processor (Clock): Quad-Core 1.3GHz ARM Cortex-A7
  • Memory: 1GB, 533MHz
  • Internal Storage: 16GB
  • Screen (Size & Type): 5.5 inches HD Display
  • Camera Overview: 8 Megapixel / 5 Megapixel
  • OS Version: Android 7.0 Nougat with Wiko UI

Wiko Lenny 4 Firmware Flash File [MT6580 Nougat ROM]:

We will guide you to install the official Lenny 4 Firmware on the device. This step is simple and straightforward to follow. We have listed the Wiko Lenny 4 Flash File below. Download the Stock ROM file to repair your Wiko Lenny 4.

Some cases we have bricked our Wiko Lenny 4 . after that, we can bring back the phone with the Stock Firmware anytime.

Also if you think your Wiko Lenny 4 lag or has a problem. Then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Wiko Lenny 4.

The Benefit Of Wiko Lenny 4 Firmware:

  • Flash Stock To Unbrick your Wiko Lenny 4
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Wiko Lenny 4
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Wiko Lenny 4
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Wiko Lenny 4 Firmware Details:

  • Gapps File: Included
  • Device Supported: Wiko Lenny 4
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6580
  • Os: Android 7.0 Nougat
Download
Wiko Lenny 4 Firmware MT6580 7.0 .zip

Pre-Requirements To Flash Wiko Lenny 4 Firmware:

Take a Backup:

Wiko Lenny 4 Flashing Tool:

We will use Sp Flash Tool to flash Wiko Lenny 4 as we use for QMobile Blue 5. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Wiko Lenny 4.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and fix the hard brick device.

This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Wiko Lenny 4 Driver:

How to install Wiko Lenny 4 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Wiko Lenny 4 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Wiko Lenny 4 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Wiko Lenny 4 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.