Home Wiko Wiko View Prime Stock Firmware File

Wiko View Prime Stock Firmware File [ROM]

Wiko View Prime

Download Stock Firmware File For Wiko View Prime. If you have Wiko View Prime Smartphone and You want to download the Wiko View Prime Stock ROM for it then you are on a Correct Place.

We are going to Flash “Wiko View Prime Firmware”. In this guide, we have used QPST Tool to flash the Stock Firmware on Wiko View Prime.

And we include the Official link to Download Wiko View Prime Stock ROM and all Needed Files.  your device may get bricked And flashing stock ROM is the only way to go out.

To perform this advance process of Flashing Stock ROM please Go Step by step. If you got any error then leave a comment.

How To Flash Wiko View PrimeStock Firmware File [ROM]

The Benefit Of Wiko View Prime Stock ROM:

  • Flash Stock To Unbrick your Wiko View Prime
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-Requirements To Flash Wiko View Prime Firmware:

A. Install Wiko View Prime ADB & Fastboot on Your Computer:

Qualcomm Drivers driver is essential if you want to flash your Qualcomm device with the Qualcomm Flash Image Loader. If you don’t have it installed, you simply can’t use the Qualcomm Flash Image Loader in flashing your Qualcomm devices.

 Just download the Android Qualcomm USB Driver and setup.

B. Wiko View Prime Flash Tool:

Qualcomm Flash Image Loader (QFIL) is a small application that allows you to flash stock firmware on Qualcomm smartphones and tablets. Download the latest version of Qualcomm Flash Image Loader application which supports Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10.

C. Take Full backup Of Wiko View Prime:

In order to ensure that you do not lose your data, it is very important to get its regular backup. Thankfully, there are many methods to perform Android complete backup.

To take full back of Wiko View Prime it is important to take full Wiko View Prime backup and its IMEI just read below helpful article and make sure you all important data is saved.

What To Do Before Android Firmware Installation?

How To Install Wiko View Prime Stock Firmware:

  1. Launch QFIL
  2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No-Port Available should change to Qualcomm HS-USB QDLoader 9008.
  3. Under Select Build Type, tick Flat Build
  4. Under Select Programmer, click Browse.
  5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open.
  6. Click Load XML.
  7. In the Window that pops up, highlights the raw program() file then click Open.
  8. Another window will automatically pop up, highlight the patch() file then click Open.
  9. Click Download.
  10. QFIL should start flashing the (Wiko View Prime firmware), Do Not interrupt.

You should get Download Succeed Finish Download once QFIL has successfully flashed the Wiko View Prime firmware. Disconnect the device and boot up

Follow Detailed Instruction Wiko View Prime Firmware Flashing With Qualcomm QPST.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Wiko View Prime Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Your smartphone must have a 70–80% charge.
[adinserter block=”6″]

Wiko View Prime Stock ROM Details

Pros

  • Gapps File: Included
  • Device: Wiko View Prime
  • Flash Tool: Qfil Flash Tool
  • SOC:
  • Os: Android

Cons

  • No Root
  • No Twrp
  • No Tweaks
  • No Overclocking
  • No Customizations

Download

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.