Home W&O W&O Max 8 Firmware Flash File

W&O Max 8 Firmware Flash File [Lollipop ROM]

3
0

This article contains the W&O Max 8 Firmware Flash Files. That will allow you to recover your W&O Max 8 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device. brick your device, change your device and also come back that device to the factory state.

W&O Max 8 Firmware Flash File [Lollipop ROM]

We will guide you to install the official Max 8 Firmware on the device. This step is simple and straightforward to follow. We have listed the W&O Max 8 Flash File below. Download the Stock ROM file to repair your W&O Max 8.

W&O Max 8 Firmware Flash File [Lollipop ROM]:

Some cases we have bricked our W&O Max 8. after that, we can bring back the phone with the Stock Firmware anytime. Also if you think your W&O Max 8 lag or has a problem. Then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the W&O Max 8.

The Benefit Of W&O Max 8 Firmware:

  • Flash Stock To Unbrick your W&O Max 8
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade W&O Max 8
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on W&O Max 8
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash W&O Max 8 Firmware:

Take a Backup:

W&O Max 8 Flashing Tool:

We will use Sp Flash Tool to flash W&O Max 8 as we use for W&O max 15. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your W&O Max 8.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

W&O Max 8 Driver:

How to install W&O Max 8 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download W&O Max 8 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction W&O Max 8 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing W&O Max 8 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

W&O Max 8 Firmware Details:

  • Gapps File: Included
  • Device Supported: W&O Max 8
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6580
  • Os: Android 5.1 Lollipop
Download
W&O Max 8 Firmware MT6580 5.1.zip

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.