YesTel Zest S10 Firmware Flash File [Stock ROM]

YesTel Zest S10 Firmware

In case you’ve bricked your YesTel Zest S10 or simply Wish to clean install the YesTel Zest S10 Firmware then you definitely are in the best place. YesTel Zest S10 is based on MTK CPU.

To install the Stock firmware on YesTel Zest S10 MediaTek powered device, you require Flashing Tool known as Sp Flash Tool, Formally also called SmartPhone Flashing Tool. Download the YesTel Zest S10 Stock Firmware, drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on YesTel Zest S10.

We will guide you to install the official YesTel Zest S10 Firmware on the device. This step is simple and straightforward to follow. We have listed the YesTel Zest S10 Flash File below. Download the Stock ROM file to repair your YesTel Zest S10.

YesTel Zest S10 Firmware Flash File [Stock ROM]:

Some cases we have bricked our YesTel Zest S10. after that, we can bring back the phone with the Stock Firmware anytime. Also if you think your YesTel Zest S10 lag or has a problem. Then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the YesTel Zest S10.

The Benefit Of YesTel Zest S10 Firmware:

  • Flash Stock To Unbrick your YesTel Zest S10
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade YesTel Zest S10
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on YesTel Zest S10
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-Requirements To Flash YesTel Zest S10 Firmware:

Take a Backup:

YesTel Zest S10 Flashing Tool:

We will use Sp Flash Tool to flash YesTel Zest S10 as we use for Remi M200. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your YesTel Zest S10.

SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

YesTel Zest S10 Driver:

How to install YesTel Zest S10 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK android USB drivers.
  3. Then download YesTel Zest S10 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When the SP flash tool opens, go to the download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close the SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy it.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction YesTel Zest S10 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing YesTel Zest S10 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

YesTel Zest S10 Firmware Details:

  • Gapps File: Included
  • Device Supported: YesTel Zest S10
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6571
  • Os: Android 4.4.2

Download

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More